GB/T 36884-2018Ships and marine technology - Ship's mooring and towing fittings - Recessed bitts(casting type) (English PDF)

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard uses the translation method equivalent to ISO 13799.2012 "ship and marine technology ship mooring and towing equipment inboard cable

Pile (casting type).

This standard has made the following editorial changes.

--- Added the informative Appendix NA to explain the mark.

This standard is proposed and managed by the National Ship Armor Standardization Technical Committee (SAC/TC129).

This standard was drafted. China Shipbuilding Industry Corporation 704 Institute.

1 Scope

This standard specifies the design, dimensions and technical requirements for in-situ bollards (casting type).

This standard applies to the design, manufacture and acceptance of inboard bollards (casting type).

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

IMOCircularMSC/Circ.1175 Ship Towing and Mooring Equipment Guide (Guidanceonshipboardtowingand

Mooringequipment)

3 Terms and definitions

The following terms and definitions apply to this document.

3.1

Safe working load safeworkingload; SWL

The maximum working load the cable is subjected to under normal operating conditions, in kilohertz (kN).

4 classification

5 specifications

The specifications and parameters of the in-line bollard (casting type) are shown in Table 1 and Figure 1.