Valid

GB/T 36834-2018Detection and identification of Bostrychoplites cornutus(Olivier) (English PDF)

角胸长蠹检疫鉴定方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 36834-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 17, 2018

Implementation date

April 1, 2019

Scope

GB/T 36834-2018 is the English-translated version of 角胸长蠹检疫鉴定方法.

GB/T 36834-2018 sets out how to detect and identify Bostrychoplites cornutus (Olivier), the horned shot-hole borer or African horned wood borer, a beetle of the family Bostrichidae, in plant quarantine.

It defines the body length, the anterior angles of the pronotum and the elytral declivity used in the description, and gives the pest's names, synonyms, taxonomic status and way of spreading, mainly by people moving infested wood.

On-the-spot inspection is guided by the pest's hazard, biology and mode of transmission, while species identification relies on the morphology of the adult: head, pronotum, elytra, abdomen and legs.

The standard also lists the equipment and reagents, from stereo microscope and micrometer to saws, chisels and axes for opening wood. It was issued on 17 September 2018 and has applied since 1 April 2019.

Found what you need?

Document preview — GB/T 36834-2018

National Standard of the People's Republic of China

ICS
65.020.01
Classification
B 16

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Terms and definitions
  • 3 Basic information
  • 4 Principle of the method
  • 5 Equipment and reagents

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the quarantine and identification methods for the horns.

This standard applies to the quarantine and identification of the longhorn.

2 Terms and definitions

The following terms and definitions apply to this document.

2.1 Body length

The length from the rake angle of the anterior thoracic plate to the end of the sheath.

2.2 Anterior angles of pronotum

Both sides of the front chest plate extend forward to a thick corner, and the outer side often has several jagged protrusions.

2.3 Elytral declivity

The inclined surface of the rear end of the sheath wing is a sloped surface, and the inclined surface is usually formed with teeth, tumors or particles.

3 Basic information

Scientific name. Bostrychoplitescornutus (Olivier, 1790)

English name. hornedshot-holeborer, Africanhornedwoodborer

Synonym. OstrichuscornutusOlivier, 1790; ApatedestructorBurchel, 1822; ApateerosipennisBuquetinDejean, 1833;BostrichusabyssinicusMurray, 1867;Bostrichuscornutusvar.minorQuedenfeldt, 1887; ApatearmataQuedenfeldt, 1887; Bostrichuscephaotes Olivier, 1790

Taxonomic status. Coleoptera, Coleoptera, Bostrichinae, Bostrichinae BostrychoplitesLesne.

Route of transmission. The insect spreads close to the adult insects and spreads by humans with insect wood.

See Appendix A for additional information on the angle chest.

4 Principle of the method

The hazard, biological characteristics and mode of transmission of the horned scorpion are the main basis for determining the quarantine method on the spot. The morphological characteristics of the adult are carried out.

The main basis for species identification includes morphological features of the head, anterior thoracic plate, coleoptera, abdomen and feet.

5 Equipment and reagents

5.1 Equipment

Stereo microscope, micrometer, magnifying glass, saw, knife, chisel, axe, screwdriver, scissors, tweezers, white cloth, white porcelain plate, finger tube. […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 36834-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 36834-2018

$205.00