GB/T 36747-2018Design specification for conservation and reinforcement of earthen site in arid environment (English PDF)
干燥环境土遗址保护加固设计规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36747-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 17, 2018
Implementation date
April 1, 2019
Scope
GB/T 36747-2018 is the English-translated version of 干燥环境土遗址保护加固设计规范.
GB/T 36747-2018 is the design code for the conservation and reinforcement of earthen sites in arid environments, meaning areas with less than 250 mm of annual precipitation.
It covers the terms used, the basic requirements for a reinforcement design, the technical requirements for reinforcing the earthen site itself, with techniques such as mud repatching and ram repatching, and the requirements for reinforcing the carrier, that is the ground and setting on which the site stands.
It also sets out what the design report must contain, and a normative annex gives the basic test points for earth anchors. It applies to the conservation and reinforcement design of earthen sites in arid areas of China and refers to GB 50003, GB 50007 and GB 50330. It was issued on 17 September 2018 and has applied since 1 April 2019.
Found what you need?
Document preview — GB/T 36747-2018
National Standard of the People's Republic of China
- ICS
- 91.120.01
- Classification
- P 20
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Basic requirements
- 5 Technical requirements for reinforcement of soil sites
- 6 Requirements for carrier reinforcement technology
- 7 Design Report Preparation Requirements
- Appendix A (Normative Appendix) Basic Test Points for Earth Anchors
- Reference
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard stipulates the terms and definitions, basic regulations, body and carrier reinforcement technical requirements for the protection and reinforcement design of dry environment soil sites. Reporting requirements.
This standard is applicable to the protection and reinforcement design of dry environmental soil sites in China.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB 50003 masonry structure design specification
GB 50007 Building Foundation Design Specification
GB 50330 Technical Specifications for Building Slope Engineering
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Earthen site
Ancient buildings, structures, structures, etc. with historical, artistic, scientific, social and cultural values, mainly composed of soil materials Relics and their environment.
3.2 Main body of earthen site
An earthen heritage that carries historical, artistic, scientific, social and cultural values.
3.3 Main carrier of earthen site
The site and environment on which the earth's ruins are based.
3.4 Arid environment
Areas with annual precipitation less than 250mm.
3.5 Conservation and reinforcement of earthen site
Technical measures taken to prevent and mitigate the development of disease at the site and improve its stability.
3.6 Mud repatching
The reinforcement technology applied to the soil sites by masonry measures.
3.7 Ram repatching
Reinforcement technology applied to earthen sites by means of tamping measures.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 36747-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 50003-2011 — Code for design of masonry structures
GB 50007-2011 — Code for design of building foundation
GB 50330-2013 — Technical code for building slope engineering
Secure payment via Stripe
Payments accepted
GB/T 36747-2018
$205.00