GB/T 36665-2018Ships and marine technology - Ship's mooring and towing fittings - Cruciform bollards (English PDF)

Also coversGBT36665-2018

Open the GB/T 36665-2018 preview as PDF

Preview — first pages of GB/T 36665-2018

This is a limited preview

Buy now to download the full PDF

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

September 17, 2018

Implementation date

April 1, 2019

Scope

GB/T 36665-2018 (Ships and marine technology - Ship's mooring and towing fittings - Cruciform bollards) is available as an English-translated PDF.

GB/T 36665-2018 — This standard specifies the design, dimensions and technical requirements of cross-belt piles suitable for installation on sea-going vessels. This standard applies to the design, manufacture and acceptance of cross-belt piles.

Document preview — GB/T 36665-2018

National Standard of the People's Republic of China

ICS: 47.020.50
Classification: U 21

Issued by: State Administration for Market Regulation, China National Standardization Administration

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 classification
4.1 Type
4.2 Nominal size
5 size

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard uses the translation method equivalent to ISO 13797.2012 "ship and marine technology ship mooring and towing equipment cross strap cable

pile".

This standard has made the following editorial changes.

--- Added the informative Appendix NA to explain the mark.

This standard is proposed and managed by the National Ship Armor Standardization Technical Committee (SAC/TC129).

This standard was drafted. Dalian Shipbuilding Industry Group Co., Ltd., COSCO Shipyard Engineering Group Co., Ltd.

1 Scope

This standard specifies the design, dimensions and technical requirements of cross-belt piles suitable for installation on sea-going vessels.

This standard applies to the design, manufacture and acceptance of cross-belt piles.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

IMOCircularMSC/Circ.1175 Ship Towing and Mooring Equipment Guide (Guidanceonshipboardtowingand

Mooringequipment)

3 Terms and definitions

The following terms and definitions apply to this document.

3.1

Safe working load safeworkingload; SWL

The maximum working load that the cross-belt pile is allowed to withstand under normal operating conditions, in kilohertz (kN).

4 classification

4.1 Type

According to the manufacturing method, the cross-belt pile can be divided into the following two types.

---A type. made of steel pipe;

---B type. Made of steel plate.

4.2 Nominal size

The cross-cables have nominal sizes of 150,.200, 250, 300, 350, and 400.

The nominal size Dn represents the outer diameter of the pile in millimeters (mm).

5 size

The specific dimensions of the cross-belt pile are shown in Table 1 and Figure 1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.

How to Buy GB/T 36665-2018

1Add to cart. Click the "Buy GB/T 36665-2018" button on this page. You can add more standards before checkout.
2Checkout. Enter your email and billing details. Payment is processed securely by Stripe (cards, Apple Pay, Google Pay supported).
3Instant delivery (0–9 sec). Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4Invoice included. A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.