Valid

GB/T 36663-2018Ships and marine technology - Ship's mooring and towing fittings - Closed chocks (English PDF)

船舶和海上技术 船舶系泊和拖带设备闭式导缆孔

Preview PDF

This is a limited preview

Buy now to download the full PDF (24 pages)

Need quotation for your management?

Get a formal quotation for GB/T 36663-2018 in 30 minutes.

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

September 17, 2018

Implementation date

April 1, 2019

Scope

GB/T 36663-2018 is the English-translated version of 船舶和海上技术 船舶系泊和拖带设备闭式导缆孔.

GB/T 36663-2018 — This standard specifies the design, dimensions and technical requirements for closed cable guides for ship rope mooring and towing. This standard applies to the design, manufacture and acceptance of closed cable guide holes.

Found what you need?

Document preview — GB/T 36663-2018

National Standard of the People's Republic of China

ICS
47.020.50
Classification
U 21

Issued by: State Administration for Market Regulation, China National Standardization Administration

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 classification
  • 4.1 Type
  • 4.2 Nominal size
  • 500 x 400 x 525 A, 500 x 250 x 525 B, 500 x 400 x 525 B.
  • 5 size

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard uses the translation method equivalent to ISO 13729.2012 "ship and marine technology ship mooring and towing equipment closed cable

hole".

This standard has made the following editorial changes.

--- Added the informative Appendix NA to explain the mark.

This standard is proposed and managed by the National Ship Armor Standardization Technical Committee (SAC/TC129).

This standard was drafted. China Shipbuilding Industry Corporation, the 7th Fourth Institute.

1 Scope

This standard specifies the design, dimensions and technical requirements for closed cable guides for ship rope mooring and towing.

This standard applies to the design, manufacture and acceptance of closed cable guide holes.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.

IMOCircularMSC/Circ.1175 Boat Towing and Mooring Equipment Guide (Guidanceonshipboardtowingand

Mooringequipment)

3 Terms and definitions

The following terms and definitions apply to this document.

3.1

Safe working load safeworkingload; SWL

The maximum load that a mooring line is allowed to withstand under normal operating conditions, in kilohertz (kN).

4 classification

4.1 Type

Closed guide holes are divided into the following two according to the installation position.

---A type. deck closed cable guide hole;

---B type. bulwark closed cable hole.

4.2 Nominal size

The nominal size of the closed cable guide, L x H x D, represents the opening width, height and depth of the guide hole in millimeters. by

The size of the closed type cable guides of Class A and Class B is the same, so for different safe working loads, the nominal size (LxHxD) is small according to D.

The order is as follows. 250 x.200 x 214, 300 x 250 x 286, 350 x 250 x 333, 400 x 250 x 381, 450 x 250 x 381,

500 x 250 x 381, 400 x 250 x 428, 450 x 250 x 428, 500 x 250 x 428, 500 x 400 x 428, 500 x 250 x 525A,

500 x 400 x 525 A, 500 x 250 x 525 B, 500 x 400 x 525 B.

5 size

The dimensions and specifications of the closed cable guide holes are shown in Figure 1, Table 1, Figure 2 and Table 2.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.

How to Download GB/T 36663-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
24 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 36663-2018

$175.00