GB/T 36659-2018Design requirements of cantilever skidding system for self-elevating drilling unit (English PDF)
自升式钻井平台悬臂梁滑移系统设计要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36659-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 17, 2018
Implementation date
April 1, 2019
Scope
GB/T 36659-2018 is the English-translated version of 自升式钻井平台悬臂梁滑移系统设计要求.
GB/T 36659-2018 sets the design requirements for the cantilever skidding system of a self-elevating (jack-up) drilling unit. It covers the composition and function of the system, its design and technical requirements and the principles for laying it out.
The system described includes the skidding unit with its skidding pin, locking pin, skidding cylinder and connecting plate, the hydraulic power unit, the hydraulic piping, the control unit, rolling devices, wear plates and optional jacks.
It applies to pin-type cantilever skidding systems and draws on the standards for hydraulic drive systems, marine hydraulic cylinders, pumping stations and hydraulic systems. It was issued on 17 September 2018 and has applied since 1 April 2019.
Found what you need?
Document preview — GB/T 36659-2018
National Standard of the People's Republic of China
- ICS
- 47.020.99
- Classification
- U 17
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Composition and function
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the composition, function, system design and design of the cantilever beam slip system of the jack-up drilling platform (hereinafter referred to as the "slip system"). Technical requirements and layout principles.
This standard applies to the design of pin-type cantilever beam slip system for jack-up drilling platforms.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 3766 General rules and safety requirements for hydraulic drive systems and their components
GB/T 13342 General technical requirements for marine reciprocating hydraulic cylinder
GB/T 14090 offshore oil and gas development engineering terminology
CB/T 1102 General technical requirements for marine hydraulic systems
CB/T 3754 Marine Hydraulic Pumping Station Technical Conditions
3 Terms and definitions
The following terms and definitions as defined in GB/T 14090 apply to this document.
3.1 Cantilever skidding beam
The pin holes of the same size are arranged at a certain distance on both sides of the lower side of the cantilever beam, and the pin holes are matched with the sliding system liquid cylinder and the sliding pin. The longitudinal beam of the sliding operation.
4 Composition and function
4.1 Composition
The slip system mainly includes a slip unit, a hydraulic power unit, a hydraulic pipe system, a control unit, a rolling device, a wear plate, and a jack (available selected). The slip unit includes a slip pin assembly, a lock pin assembly, a slip fluid cylinder, and a connecting plate. The composition diagram is shown in Figure 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 36659-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13342-2007 — Specification for marine reciprocating hydraulic cylinder
GB/T 14090-2020 — Terminology for offshore oil and gas development engineering
GB/T 3766-2015 — Hydraulic fluid power -- General rules and safety requirements for systems and their components
Secure payment via Stripe
Payments accepted
GB/T 36659-2018
$85.00