GB/T 36580-2018Test method of model propeller for cavitation observation and pressure fluctuation measurement (English PDF)
船舶螺旋桨空泡脉动压力模型试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36580-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 17, 2018
Implementation date
April 1, 2019
Scope
GB/T 36580-2018 is the English-translated version of 船舶螺旋桨空泡脉动压力模型试验方法.
GB/T 36580-2018 describes model tests of ship propellers for observing cavitation and measuring the pressure fluctuations it induces on the hull surface.
It covers the similarity parameters, the simulation and measurement of the flow, the procedures for cavitation observation and pulsating pressure measurement, and the requirements for test facilities and instruments.
Defined terms include cavitation, pulsating pressure, the pulsating pressure coefficient, made dimensionless with the density of the test medium and the propeller speed and diameter, and the face cavitation margin, and a table of symbols is given.
The method applies to propellers of surface ships tested in variable-pressure circulating water tunnels or cavitation tanks, and can also serve as a reference for tests in a depressurised towing tank. It was issued on 17 September 2018 and has applied since 1 April 2019.
Found what you need?
Document preview — GB/T 36580-2018
National Standard of the People's Republic of China
- ICS
- 47.020.20
- Classification
- U 11
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Terms and definitions
- 3 Symbol
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the similar parameters of the ship propeller cavitation and its induced pulsating pressure model test on the hull surface, flow simulation and measurement, cavitation observation and pulsation pressure measurement procedures, as well as requirements for test facilities and test instruments.
This standard is applicable to the bubble pulsation pressure model test of various types of surface ship propellers in variable pressure circulating water tanks or vacuolar water tanks.
It can also be used as a reference for the propeller model when performing a bubble pulsation pressure test in a vacuum towed pool.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1 Cavitation
A phase change that occurs inside a liquid or at a liquid-solid interface under hydrodynamic forces. In the field of ships, usually referred to as a vapor phase transition phenomenon produced by a relatively moving solid surface in a liquid under low saturated steam pressure conditions.
2.2 Pulsating pressure
Unsteady pressure induced on the surface of the hull above the propeller when the propeller is operating behind the ship.
2.3 Pulsating pressure coefficient
The value of the pulsating pressure amplitude is dimensionless by the test medium density, the propeller speed, and the propeller diameter.
2.4 Face cavitation margin
The difference between the propeller load factor and the load factor when the ship is in the specified operating conditions is divided by the propeller load factor at the specified operating condition, as a percentage.
3 Symbol
The symbols in Table 1 apply to this document.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 36580-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 36580-2018
$210.00