Valid

GB/T 36574-2018Principles and requirements for the comprehensive utilization of exhaust gases in industrial park (English PDF)

产业园区废气综合利用原则和要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 36574-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 10, 2018

Implementation date

May 1, 2019

Scope

GB/T 36574-2018 is the English-translated version of 产业园区废气综合利用原则和要求.

GB/T 36574-2018 gives the principles and requirements for the comprehensive utilization of waste gases in industrial parks.

It classifies the exhaust gases a park can reuse, starting with CO2-based gases such as synthetic ammonia by-product gas, exhaust from ethylene oxide and ethylene glycol units and steelmaking by-product gas, and then sets the basic principles and basic requirements for putting them to use.

It defines the industrial park, the circular economy industrial chain and the circular economy guidelines of a park, and refers to the national standards for ambient air quality, wastewater discharge, industrial noise and air pollutant emissions.

It applies to the planning, design and operation of waste gas utilization in industrial parks. It was issued on 10 October 2018 and has applied since 1 May 2019.

Found what you need?

Document preview — GB/T 36574-2018

National Standard of the People's Republic of China

ICS
13.020.10
Classification
Z 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Industrial parks can comprehensively use the classification of exhaust gas
  • 5 Basic Principles
  • 6 Basic requirements

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the classification, basic principles and requirements for the comprehensive utilization of waste gas in industrial parks.

This standard applies to the planning, design and production operation of comprehensive utilization of waste gas in industrial parks.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB 3095 Ambient Air Quality Standard

GB 8978 Integrated Wastewater Discharge Standard

GB 12348 Environmental noise emission standards for industrial enterprises

GB 16297 Integrated emission standards for atmospheric pollutants

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Industrial park

The area where a number of industrial enterprises are gathered is an important form of spatial aggregation for regional economic development, industrial adjustment and upgrading.

Note: The specific forms of industrial parks mainly include high-tech zones, development zones, science and technology parks, industrial parks, industrial bases, characteristic industrial parks, industrial and technological new cities.

3.2 Circular economy industry chain

Chain-related associations based on material metabolites within industrial park enterprises or between different enterprises based on industrial symbiosis form.

3.3 Circular economy policy

Based on the circular economy related laws and regulations, policies, standards and the status of material metabolism in industrial parks, the industrial park circular economy management agency The overall intention and direction of the circular economy development and circular economy performance of the park.

4 Industrial parks can comprehensively use the classification of exhaust gas

4.1 CO2-based exhaust gas

Exhaust gases based on CO2 include, but are not limited to.

--- Synthetic ammonia by-product gas;

--- Ethylene oxide and ethylene glycol (EOEG) device exhaust;

--- Steelmaking by-product gas;

--- Other CO2 mixed gas, etc.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 36574-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 36574-2018

$85.00