Partners save 15% on every standard

Valid

GB/T 36539-2018Microscopes -- Information provided to the user (English PDF)

Also coversGBT36539-2018

Open the GB/T 36539-2018 preview as PDF

Preview — first pages of GB/T 36539-2018

This is a limited preview

Buy now to download the full PDF

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

July 13, 2018

Implementation date

February 1, 2019

Scope

GB/T 36539-2018 (Microscopes -- Information provided to the user) is available as an English-translated PDF.

GB/T 36539-2018 — This standard specifies the minimum demand information provided by the microscope manufacturer to the user. This standard does not apply to inverted microscopes, digital microscopes, and modern technology microscopes.

Document preview — GB/T 36539-2018

National Standard of the People's Republic of China

ICS: 37.020
Classification: N 32

Issued by: State Administration for Market Regulation, China National Standardization Administration

Foreword
1 Scope
2 Normative references
3 Information provided by the manufacturer
3.1 Basic information
3.2 Design information

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard uses the translation method equivalent to ISO 12853.2015 "Information provided by the microscope to the user".

The documents of our country that have a consistent correspondence with the international documents referenced in this standard are as follows.

---GB/T 22056-2008 Marking of microscope objectives and eyepieces (ISO 8578.1997, MOD).

This standard was proposed by the China Machinery Industry Federation.

This standard is under the jurisdiction of the National Optical and Photonics Standardization Technical Committee (SAC/TC103).

This standard was drafted. Zhangzhou Aoka Optical Instrument Co., Ltd., Shanghai University of Technology, Ningbo Teaching Instrument Co., Ltd., Ningbo Yongxin

Optical Co., Ltd., Nanjing Donglilai Optoelectronic Industry Co., Ltd., Nanjing Jiangnan Yongxin Optical Co., Ltd., Ningbo Zhanjing Optical Instrument

Co., Ltd., Ningbo Huaguang Precision Instrument Co., Ltd., Ningbo Haoyu Instrument Co., Ltd., Suzhou Yiguang Instrument Co., Ltd., Guiyang Xintianguang

Electric Technology Co., Ltd.

1 Scope

This standard specifies the minimum demand information provided by the microscope manufacturer to the user.

This standard does not apply to inverted microscopes, digital microscopes, and modern technology microscopes.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

ISO 8578 Microscopes-Markingofobjectivesandeyepieces

3 Information provided by the manufacturer

3.1 Basic information

(m) Represents the necessary information for the microscope assembly characteristics provided by the manufacturer. (r) indicates recommended information provided by the manufacturer, but not necessarily

Required.

3.1.1 Origin Information

3.1.1.1 (m) Manufacturer.

3.1.1.2 (r) Country of origin, when required.

3.1.2 (r) Application areas

For example. colleges and majors, teaching experiments, research, industry, etc.

3.1.3 (m) Imaging and illumination methods

For example. transmitted light, reflected light, bright field, dark field, phase contrast, differential interference, polarized light, fluorescence, and the like.

3.1.4 (r) Accessories

For example. an imaging device, an optional light source, a controller, a photometric device, an image processing device, a photographing device, and the like.

3.2 Design information

3.2.1 Optical system

3.2.1.1 (m) Optical system type

For example. limited distance, infinity.

3.2.2 Rack

3.2.2.1 Frame size in millimeters (mm) (see Figure 1).

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.

Referenced standards

Normative references

ISO 8578

How to Buy GB/T 36539-2018

1Add to cart. Click the "Buy GB/T 36539-2018" button on this page. You can add more standards before checkout.
2Checkout. Enter your email and billing details. Payment is processed securely by Stripe (cards, Apple Pay, Google Pay supported).
3Instant delivery (0–9 sec). Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4Invoice included. A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.