GB/T 36462-2018General requirements for component-oriented virtual prototype software development (English PDF)
面向组件的虚拟样机软件开发通用要求
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36462-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 7, 2018
Implementation date
January 1, 2019
Scope
GB/T 36462-2018 is the English-translated version of 面向组件的虚拟样机软件开发通用要求.
GB/T 36462-2018 gives the general requirements for developing component-based virtual prototype software in the simulation field.
It covers the development environment, the development process and the documentation to be produced, and then turns to the atomic models that make up a virtual prototype: how their ports and variables are described, which functions they implement and how they are integrated through COM or ordinary DLL interfaces.
Annexes give a programming reference for atomic model functions, the integration interface requirements and an XML schema for describing atomic model port services.
The standard also defines the product forms of a virtual prototyping software product and of a software library. It applies to the development of virtual prototype software for complex products. It was issued on 7 June 2018 and has applied since 1 January 2019.
Found what you need?
Document preview — GB/T 36462-2018
National Standard of the People's Republic of China
- ICS
- 35.080
- Classification
- L 77
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions, Abbreviations
- 3.1 Terms and Definitions
- 3.2 Abbreviations
- 4 General Requirements for Virtual Prototyping Software Overview
- 5 Virtual Prototyping Software Development Environment Requirements
- 6 Virtual Prototyping Software Development Process Requirements
- 7 Virtual Prototyping Software Documentation Requirements
- 8 Atomic Model Port Description Requirements
- 8.1 General requirements
- 8.2 Atomic Model Port Description Requirements
- 8.3 Atomic Model Variable Description Requirements
- 9 Atomic Model Functional Requirements
- 10 Atomic Model Integration Interface Requirements
- 10.1 Overview
- 10.2 COM Form Atom Model Interface
- 10.3 Normal DLL Form Atom Model Interface
- 11 Form of Product Form
- 11.1 Virtual Prototyping Software Product Form
- 11.2 Software Library Product Form
- Appendix A (Informative) Atom Model Function Function Programming Reference
- Appendix B (Normative Appendix) Atom Model Integration Interface Requirements
- Appendix C (Normative) Atomic Model Port Service Description XML Schema
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the general requirements for the development of virtual prototype software for components in the field of simulation, including environmental requirements and process requirements.
And documentation requirements. At the same time corresponds to the general simulation technology, but also on the port description requirements and functional implementation requirements for atomic component development.
The integrated interface requirements and the form of the product are fully described.
This standard applies to the development of complex product virtual prototype software.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest version (including all amendments) applies to this document.
GB/T 8566-2007 information technology software life cycle process
GB/T 8567-2006 Computer Software Documentation Specification
GB/T 11457-2006 Information Technology Software Engineering Terms
3 Terms and Definitions, Abbreviations
3.1 Terms and Definitions
The definitions of GB/T 8566-2007 and GB/T 11457-2006 and the following terms and definitions apply to this document.
3.1.1 Virtual Prototype
A set of computer numerical models that correspond to physical products.
Note: The virtual prototype defines, simulates, tests and evaluates physical products from the aspects of construction, function and performance, and is used as a physical product in the development, production and The main basis for the use of activities during the life cycle.
3.1.2 Virtual Prototype System
Taking Virtual Prototype as the Main Body, Further Integrating the Digital Simulation of Multi-disciplinary Models of Real-world System Application Environment, Target Objects, etc. system.
3.1.3 Component
The concept of logic composition in the field of simulation is the software implementation of various granularity and discipline models in the virtual prototyping system. further, Components correspond to the model of the simulation domain, and atomic components (ie, the most fine-grained components) correspond to atomic models.
Note: Components only include well-defined interfaces and external environmental dependencies, independent releases and can be integrated by third parties.
3.1.4 Component Object Model
A common model for component-oriented development under the Windows operating system.
Note: The Component Object Model can provide services to applications, operating systems, and other components.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 36462-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 11457-2006 — Information technology Software engineering terminology
GB/T 8567-2006 — Specification for computer software documentation
GB/T 7251.4-2026 — Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
Secure payment via Stripe
Payments accepted
GB/T 36462-2018
$295.00