Valid

GB/T 36449-2018General requirements for electronic examination room system (English PDF)

电子考场系统通用要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (48 pages)

Need quotation for your management?

Get a formal quotation for GB/T 36449-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 7, 2018

Implementation date

January 1, 2019

Scope

GB/T 36449-2018 is the English-translated version of 电子考场系统通用要求.

GB/T 36449-2018 is the Chinese standard "General requirements for electronic examination room system". Its scope clause reads: This standard specifies the electronic examination sites from the four parts of the video inspection system, radio cheating prevention and control system, identification system and command system.

Online inspection system system structure, functional requirements, technical requirements, system security, radio compatibility, environmental adaptability and reliability Use technical requirements.

This standard is applicable to the design, construction, and management of an online inspection system for an electronic examination room.

Found what you need?

Document preview — GB/T 36449-2018

National Standard of the People's Republic of China

ICS: 35.240.99
Classification: L 67

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 Normative references
3 Terms and Definitions
4 Abbreviations
5 Overview
6 Video Tour Test System
6.1 System Structure
6.2 System Function Requirements
6.3 audio and video codec requirements
6.4 Data Transmission Requirements
6.5 Data Exchange Requirements
6.6 Port Definition
6.7 Device Control Protocol
6.8 Electronic examination room equipment compatibility
7 Radio cheating prevention and control system
7.1 Overview
7.2 System Function Requirements
7.3 System Performance Requirements
7.4 Transmission and Management
8 Identification System
8.1 Overview
8.2 Candidate Identity Information Acquisition Verification Terminal Technical Requirements
8.3 Candidate Identity Information Management System Functional Requirements
8.4 System Security Requirements
8.5 Identity System Performance Test
9 Command System
9.1 Overview
9.2 Command Center Function Requirements
9.3 Command Center Layout and Environmental Requirements
9.4 Test Room Technical Protection Equipment System
9.5 Examination paper security room technical protection equipment system construction requirements
Appendix A (Normative) School (Organization) Nomenclature
Appendix B (informative annex) Electronic examination room equipment compatibility test
Appendix C (Informative) Cheat Prevention System Function and Performance Test
Appendix D (Informative) Identification System Test
References

1 Scope

This standard specifies the electronic examination sites from the four parts of the video inspection system, radio cheating prevention and control system, identification system and command system.

Online inspection system system structure, functional requirements, technical requirements, system security, radio compatibility, environmental adaptability and reliability

Use technical requirements.

This standard is applicable to the design, construction, and management of an online inspection system for an electronic examination room.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 2887-2011 General Specification for Computer Sites

GB 8702-2014 electromagnetic environmental control limit

GB/T 9361-2011 Computer Site Safety Requirements

GB/T 13000-2010 General multi-coded character set (UCS) for information technology

GB/T 17975.1-2010 Generic coding of moving images and associated audio information for information technology - Part 1. System

GB 18030-2005 Information Technology Chinese Coded Character Set

GB/T 20090.1-2012 Information technology advanced audio and video coding Part 1. System

GB/T 22239-2008 Information Security Technology Information System Security Level Protection Basic Requirements

GB/T 25068.5-2010 Information technology - Security technology - IT network security - Part 5. Cross-network communication using virtual private networks

Security protection

GB/T 25724-2017 Public safety video surveillance digital video audio codec technical requirements

GB/T 28181-2016 Technical requirements for information transmission, exchange and control of public safety video surveillance networking systems

GB/T 33782-2017 Information technology learning, education and training education management code

GB 50799-2012 Electronic Conference System Engineering Design Specification

GA450-2013 Desktop Resident Identity Card Reader General Technical Requirements

GA/T 1011-2012 General Requirements for Resident ID Fingerprint Collector

GA1012-2012 Fingerprint Identification and Comparison Technical Specifications for Resident Identity Cards

ISO /IEC 14496-3 coding of audiovisual objects for information technology - Part 3. Information technology -

Codingofaudio-visualobjects-Part 3.Audio)

ITU-T G.711-1988 Pulse code modulation for voice frequency [PCM] of voicefrequen-

Cies]

ITU-T G.721 32 kbit/s adaptive differential pulse code modulation (32 kbit/s ADPCM adaptive difference pulse

Codemodulation)

ITU-T G.729-2012 8 kbit/s speech coding using conjugate structure algebraic code-excited linear prediction (CS-CELP)

[Codingofspeechat8kbit/susingconjugate-structurealgebraic-code-excitedlinearprediction(CS-

ACELP)]

ITU-TVCEGAVC/H.264 Video Coding Standard (Advanced Video Coding) […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 48 pages — is available in the English PDF.

Referenced standards

Normative references

GA450-2013 · GA1012-2012

Similar standards

GB/T 44554.6-2026|GB/T 46971-2026|GB/T 47017-2026|GB/T 47022-2026|GB/T 47474-2026|GB/T 17917-2025

How to Download GB/T 36449-2018

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.