GB/T 36292-2018Greases for overhead conductors (English PDF)
架空导线用防腐脂
This is a limited preview
Buy now to download the full PDF (34 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36292-2018 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
June 7, 2018
Implementation date
January 1, 2019
Scope
GB/T 36292-2018 is the English-translated version of 架空导线用防腐脂.
GB/T 36292-2018 is the Chinese standard "Greases for overhead conductors". Its scope clause reads: This standard specifies the product identification, performance requirements and test methods for anti-corrosion grease for overhead conductors.
This standard applies to anti-corrosion grease for overhead conductors. Its clauses include product identification.
Found what you need?
Document preview — GB/T 36292-2018
National Standard of the People's Republic of China
- ICS
- 29.060.10
- Classification
- K 11
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Product ID
- 4 anti-corrosion performance requirements
- 5 test
- Appendix A (informative) This standard and the IEC 61394.2011 chapter number comparison list
- Appendix B (informative) List of technical differences between this standard and IEC 61394.2011 and their causes
- Appendix C (Normative Appendix) Test Method for High Temperature Stability of Anticorrosive Grease
- Appendix D (Normative Appendix) Test Method for Acid Value or Alkali Value of Antiseptic Fats
- Appendix E (Normative) Sample preparation and test methods for aging tests
- Appendix F (Normative) Stability of anti-corrosion grease on wires under high temperature conditions
- Appendix G (Normative) Stability of anti-corrosion grease on wires under short-circuit conditions
1 Scope
This standard specifies the product identification, performance requirements and test methods for anti-corrosion grease for overhead conductors.
This standard applies to anti-corrosion grease for overhead conductors.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2423.17-2008 Environmental testing of electrical and electronic products - Part 2. Test methods Test Ka. Salt spray (IEC 60068-
2-11.1981, IDT)
ISO 2137.2007 Determination of petroleum products and grease greases and petroleum greases (Petroleumproductsandlu- bricants-Determinationofconepenetrationoflubricatinggreasesandpetrolatum)
ISO 2176.1995 Determination of grease drop points for petroleum products (Petroleumproducts-Lubricatinggrease-De-
Terminationofdroppingpoint)
3 Product identification
The marking of the anti-corrosion grease is in the form of theta1Atheta2 or theta1Btheta2, where A and B are the types of anti-corrosion grease.
--- Type A. Generally suitable for cold coating. Such as grease, semi-solid or solid, mainly composed of mineral oil or synthetic oil and thickener (gold
It is a stable mixture of soap or inorganic compound.
--- Type B. Generally suitable for hot coating. For example, petrolatum, semi-solid or solid, mainly consisting of microcrystalline wax and a small amount of mineral oil and
Machine additive composition.
---theta1. Refers to the minimum applicable temperature value of the anti-corrosion grease in the air to protect the wire at 0 °C, see Table 1.
---theta2. Refers to the highest applicable temperature value of the anti-corrosion grease to meet the applicable requirements (to achieve the specified dropping point or high temperature stability), see Table 1.
Example 1. Type 20A150A anti-corrosion grease, minimum applicable temperature (theta1) -20 ° C, maximum applicable temperature (theta2) 150 ° C.
Example 2. Type 40A120A anti-corrosion grease, minimum applicable temperature (theta1) -40 ° C, maximum applicable temperature (theta2) 120 ° C.
Example 3. Type 20B80B anti-corrosion grease, minimum applicable temperature (theta1) -20 ° C, maximum applicable temperature (theta2) 80 ° C.
The anti-corrosion grease supplier shall provide a unique identification for the product and retain the specific component information for inquiry. The component should contain component deviations,
The preservative under the marking should not change before the sale.
Table 1 Maximum applicable temperature and minimum applicable temperature of common type A anti-corrosion grease model
Minimum applicable temperature theta1
Maximum applicable temperature theta2
20A120 -20 120
20A180 -20 180
20A280 -20 280
GB/T 5585.2 | GB/T 36102 | GB/T 30552 | GB/T 46382 | GB/T 17937 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 34 pages — is available in the English PDF.
Referenced standards
Normative references
IEC 60068 · ISO 2137.2007 · ISO 2176.1995
How to Download GB/T 36292-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2423.17-2008 — Environmental testing for electric and electronic products - Part 2: Test method - Test Ka: Salt mist
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 36292-2018
$295.00