Valid

GB/T 36290.1-2020Process diagrams for power plants - Part 1: Specification for diagrams (English PDF)

电站流程图 第1部分:制图规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (57 pages)

Need quotation for your management?

Get a formal quotation for GB/T 36290.1-2020 in 30 minutes.

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

June 2, 2020

Implementation date

December 1, 2020

Scope

GB/T 36290.1-2020 is the English-translated version of 电站流程图 第1部分:制图规范.

GB/T 36290.1-2020 is the Chinese standard "Process diagrams for power plants - Part 1: Specification for diagrams". Its scope clause reads: This part of GB/T 36290 specifies the types of power plant flow charts, and the rules for preparing and expressing information in the corresponding types of flow charts And guide.

This part belongs to the common application standard of ISO 15519 series. This section does not apply to electrical technical drawings covered by IEC 61082 and hydraulic drawings covered by ISO 1219-2. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 36290.1-2020

National Standard of the People's Republic of China

ICS
01.100.01
Classification
F 10

Issued by: State Administration for Market Regulation, China National Standardization Administration

Contents

  • Foreword
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Basic aspects of power plant flow chart
  • 4.1 General
  • 4.2 Drawing types and their relationship
  • 4.3 Life cycle aspects
  • 4.4 Information content in drawings
  • 5 Drawing type and content
  • 5.1 General
  • 5.2 Block Diagram (BLD)
  • 5.2.1 Description
  • 5.2.2 Application
  • 5.2.3 Content
  • 5.2.4 Representation
  • 5.3 Process Flow Diagram (PFD)
  • 5.3.1 Description
  • 5.3.2 Application
  • 5.3.3 Content
  • 5.3.4 Representation
  • 5.3.5 Flow chart of other types of process
  • 5.4 Process and instrumentation diagram (PID)
  • 5.4.1 Description
  • 5.4.2 Application
  • 5.4.3 Content
  • 5.4.4 Representation
  • 5.5 Process control diagram
  • 5.5.1 Description
  • 5.5.2 Application
  • 5.5.3 Content
  • 5.5.4 Representation
  • 5.6 Typical Figure
  • 5.6.1 Description
  • 5.6.2 Application
  • 5.6.3 Content
  • 5.6.4 Representation
  • 6 Represents the theme
  • 6.1 General
  • 6.2 Document paper
  • 6.3 Technical information
  • 6.4 Graphic symbols
  • 6.4.1 General
  • 6.4.2 Graphical symbols for power plant drawing
  • 6.4.3 Extension of information
  • 6.4.4 Combination of graphic symbols
  • 6.4.5 Representation of large/complex objects in the figure
  • 6.5 Connection
  • 6.5.1 General
  • 6.5.2 Flow direction indication
  • 6.5.3 Diameter indication
  • 6.5.4 Variable size of pipeline
  • 6.5.5 Representation of connection
  • 6.6 Measurement and control
  • 6.7 Non-object symbols
  • 6.8 Reference mark
  • 6.8.1 General
  • 6.8.2 Representation and position
  • 6.8.3 Reference mark of the pipeline
  • Appendix A (informative appendix) Non-object type symbols, etc.
  • Appendix B (informative appendix) Example Figure
  • Appendix C (informative appendix) Power station reference mark
  • Appendix D (informative appendix) Refer to identification symbol
  • References

1 Scope

This part of GB/T 36290 specifies the types of power plant flow charts, and the rules for preparing and expressing information in the corresponding types of flow charts

And guide.

This part belongs to the common application standard of ISO 15519 series.

This section does not apply to electrical technical drawings covered by IEC 61082 and hydraulic drawings covered by ISO 1219-2.

2 Normative references

The following documents are essential for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.

Terms of ISO 10209 technical product documents and technical drawings, product definitions and related documents (Technical productdocumentation-Vocabulary-Termsrelatingtotechnicaldrawings,productdefinitionand relateddocumentation)

ISO 14617 (all parts) Graphic symbols for graphs (Graphicalsymbolsfordiagrams)

ISO 15519 (all parts) Specification for process industrial drawing (Specificationfordiagrams for process industry)

3 Terms and definitions

The terms and definitions defined by ISO 15519 (all parts) and ISO 10209 and the following apply to this document.

3.1 Blockdiagram;BLD

An overview drawing mainly using box symbols.

Note. Rewrite ISO 10209.2012, definition 11.16.

3.2 Process flow diagram processflowdiagram; PFD

A diagram that describes the composition of a process system or process plant through graphical symbols.

Note. Rewrite ISO 10209.2012, definition 11.126.

3.3 Process and instrumentation diagram processandinstrumentationdiagram; PID

Through the equipment, process flow path, process measurement and control function graphic symbols to represent the process system technology diagram.

Note. The process and instrument drawing types used in this section are technically the same as pipeline and instrument drawings. The reason why this part identifies the drawing name

The change is due to the use of this document type in the processing of fluids and solid materials in the field of power plants. Abbreviations for process and instrumentation diagrams in this section

Use PID to distinguish it from the traditional abbreviation P used in pipelines and instrumentation diagrams

3.4 Process control diagram processcontroldiagram; PCD

Diagram showing the configuration of measurement, control, and execution functions of a system or subsystem.

GB/T 42322 | GB/T 42320 | GB/T 41235 | GB/T 47411 | GB/T 46925 | GB/T 36290.2 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 57 pages — is available in the English PDF.

Referenced standards

Normative references

ISO 10209 · ISO 14617 · ISO 15519

How to Download GB/T 36290.1-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
57 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 36290.1-2020

$480.00