GB/T 36235-2018Mechanical automatic strapping machine (English PDF)
机械式自动捆扎机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36235-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 14, 2018
Implementation date
December 1, 2018
Scope
GB/T 36235-2018 is the English-translated version of 机械式自动捆扎机.
GB/T 36235-2018 is the Chinese product standard for mechanical automatic strapping machines, which use a mechanical drive to feed and tension polyethylene (PE) or polypropylene (PP) strapping tape and close it with a hot-melt lap joint, either in single cycles or continuously.
It covers the machine types, basic parameters and working conditions, technical requirements, test methods and inspection rules, as well as marking, packaging, transportation and storage.
It defines the terms used to assess performance, including the time for each strapping cycle, effective strapping and the strapping pass rate, the share of effective cycles over the total.
Manufacturers and test laboratories use it together with the packaging machinery safety and noise standards it cites. It was issued on 14 May 2018 and has applied since 1 December 2018.
Found what you need?
Document preview — GB/T 36235-2018
National Standard of the People's Republic of China
- ICS
- 55.200
- Classification
- J 83
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the type, type, basic parameters and working conditions, technical requirements, test methods and inspection rules of the mechanical automatic strapping machine. And logo, packaging, transportation and storage.
This standard applies to polyethylene (PE), polypropylene (PP) packing tape (hereinafter referred to as "packing belt") as a tying material, using mechanical transmission A mechanical automatic strapping machine that can automatically or continuously complete the binding of objects by means of hot-melt lap joints and hot-melt lap joints (hereinafter referred to as "Bundling machine").
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 packaging storage and transportation icon
GB 2894-2008 Safety signs and guidelines for their use
GB 5226.1-2008 Mechanical electrical safety machinery and electrical equipment - Part 1. General technical conditions
GB/T 7311 Packaging Machinery Classification and Modeling Method
GB/T 9969 General guidelines for the use of industrial products
GB/T 13306 signage
General technical conditions for GB/T 13384 mechanical and electrical product packaging
JB/T 7232 Packaging Machinery Noise Sound Power Level Determination Method
JB7233-1994 Packaging Machinery Safety Requirements
QB/T 3811 plastic strapping
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Mechanical automatic strapping machine
It adopts the mechanical transmission belt and the belt, and the hot-melt lap joint is used as the joint form, which can complete the object binding machine continuously or in a single time.
3.2 Each strapping time
The time required to complete the standard package strapping process each time.
3.3 Effective strapping
In the process of bundling, the straps cannot be bonded, the straps are not in place, and the strapping cycle is abnormal.
3.4 Bundling pass rate
The percentage of effective bundling times and total bundling times.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB 2894-2008Safety colours and safety signs
- GB/T 7311Classification and editorial nominating method for packaging machinery
- GB/T 9969General principles for preparation of instructions for use of industrial products
- GB/T 13306Plates
- GB/T 13384General specifications for packing of mechanical and electrical product
GB 5226.1-2008 · JB7233-1994 · QB/T 3811
Similar standards
How to Download GB/T 36235-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13306-2011 — Plates
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 191-2025 — Graphical symbols marking for handling and storage of packages
Secure payment via Stripe
Payments accepted
GB/T 36235-2018
$145.00