Valid

GB/T 35985-2018Calculation of analyses to different bases for coal (English PDF)

煤炭分析结果基的换算

Preview PDF

This is a limited preview

Buy now to download the full PDF

Need quotation for your management?

Get a formal quotation for GB/T 35985-2018 in 30 minutes.

Issued by

AQSIQ; SAC

Level / Type

National · Recommended

Issue date

February 6, 2018

Implementation date

September 1, 2018

Scope

GB/T 35985-2018 is the English-translated version of 煤炭分析结果基的换算.

GB/T 35985-2018 — This Standard specifies the method summary, symbols and calculations for the calculation of analyses to different bases for coal. This Standard applies to coal and coke.

Found what you need?

Document preview — GB/T 35985-2018

National Standard of the People's Republic of China

Issued by: AQSIQ; SAC

Contents

  • Foreword3
  • 1 Scope4
  • 2 Normative references4
  • 3 Method summary5
  • 4 Symbols5
  • 5 Calculation of analyses to different bases for coal6
  • Appendix A (Informative) Structural changes between this Standard and ISO 1170:201312
  • Appendix B (Informative) Technical differences between this standard and ISO19579: 2013 and their reasons13
  • Appendix C (Normative) Mineral matter in coal14

1 Scope

This Standard specifies the method summary, symbols and calculations for the calculation of analyses to different bases for coal.

This Standard applies to coal and coke.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies to this document. For undated references, the latest edition (including any amendment) applies to this document.

GB/T 212, Proximate analysis of coal (GB/T 212-2008, ISO 11722:1999, ISO 1171:1997, ISO 562:1998, NEQ)

GB/T 213, Determination of calorific value of coal (GB/T 213-2008, ISO 1928:1995, MOD)

GB/T 214, Determination of total sulfur in coal (GB/T 214-2007, ISO 334:1992, MOD)

GB/T 215, Determination of forms of sulfur in coal (GB/T 215-2003, ISO 157:1996, MOD)

GB/T 218, Determination of the carbonate carbon dioxide content in coal (GB/T 218-1996, ISO 925:1997, MOD)

GB/T 476, Determination of carbon and hydrogen in coal (GB/T 476-2008, ISO 625:1996, MOD)

GB/T 483, General rules for analytical and testing methods of coal (GB/T 483-2007, ISO 1213-2:1992, NEQ)

GB/T 3558, Determination of chlorine in coal (GB/T 3558-2014, ISO 587:1997, NEQ)

GB/T 7560, Determination of mineral matter in coal (GB/T 7560-2001, ISO 602:1983, IDT)

GB/T 19227, Determination of nitrogen in coal (GB/T 19227-2008, ISO 333:1996, ISO/TS 11725:2002, MOD)

GB/T 25214, Determination of total sulfur in coal by IR spectrometry (GB/T 25214-2010, ISO 19579:2006, MOD)

GB/T 30732, Proximate analysis of coal - Instrumental method

GB/T 30733, Determination of total carbon, hydrogen and nitrogen content in coal - Instrumental method (GB/T 30733-2014, ISO 29541:2010, MOD)

3 Method summary

Substitute the relevant value into the corresponding formula, then, multiply the item value represented by the basis of value given, so as to obtain the item value represented by the basis of value wanted.

4 Symbols

4.1 Symbols of bases

Coal analyses - expressed by different bases - are represented by the abbreviations of the English names of the bases, marked in the lower right corner of the bullets, behind the fine bullets, and separated by a comma. The symbols of common bases for coal analysis tests are:

ad: air dried basis;

ar: as received basis;

d: dry basis;

daf: dry ash-free basis;

dmmf: dry mineral matter-free basis.

4.2 Item symbols

The symbols defined in GB/T 483 and the following symbols apply to this document:

A: ash;

C: carbon;

Cl: chlorine;

Clinorg: inorganic chlorine;

CO2: carbonate carbon dioxide;

FCl: correction factor for the calculation of inorganic chlorine;

Fh: correction factor for the calculation of water of hydration;

FMM: correction factor for the calculation of mineral matter;

H: hydrogen;

Mad: general analysis test coal sample moisture;

Mh: water of hydration in the mineral matter;

MM: mineral matter (see Appendix C);

N: nitrogen;

O: oxygen;

Qgr, v: constant-volume gross calorific value;

Qnet, v: constant-volume net calorific value;

So: organic sulfur;

Sp: pyritic sulfur;

Ss: sulfate sulfur;

St: total sulfur;

V: volatile matter.

5 Calculation of analyses to different bases for coal

5.1 General

The analysis result of air dried basis obtained in the analysis of coal can be expressed in terms of the results of “as received basis”, “dry basis”, “dry ash-free basis” and “dry mineral matter-free basis” through conversion.

5.2 Calculation of analyses to different bases

5.2.1 Substitute the relevant value into the corresponding formula at the intersection

of the corresponding basis of value given (row) and the basis of value wanted

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.

Referenced standards

Normative references

ISO 11722 · ISO 1171 · ISO 562 · ISO 1928 · ISO 334 · ISO 157 · ISO 925 · ISO 625 · ISO 1213 · ISO 587 · ISO 602 · ISO 333 · ISO/TS 11725 · ISO 19579 · ISO 29541

How to Download GB/T 35985-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35985-2018

$145.00