GB/T 35856-2018Methods of insulation resistance test and resistant high voltage test for aircraft electrical equipment (English PDF)
飞机电气设备绝缘电阻和耐压试验方法
This is a limited preview
Buy now to download the full PDF (11 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35856-2018 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
February 6, 2018
Implementation date
February 6, 2018
Scope
GB/T 35856-2018 is the English-translated version of 飞机电气设备绝缘电阻和耐压试验方法.
GB/T 35856-2018 — This standard stipulates the insulation resistance test and withstand voltage test requirements for electrical equipment intended for installation and proposes four types of equipment.
Insulation requirements. This standard applies to the insulation resistance test and withstand voltage test of electrical equipment intended for installation. This standard does not cover the installed fly Insulation test of equipment on board.
Found what you need?
Document preview — GB/T 35856-2018
National Standard of the People's Republic of China
- ICS
- 49.060
- Classification
- V 40
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Requirements
- 4.1 withstand voltage
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard uses the translation method equivalent to using ISO 2678. 1985 "aircraft equipment environmental test insulation resistance and high voltage test."
The Chinese documents that have a consistent correspondence with the normatively cited international documents in this standard are as follows.
---HB6167 (All parts) Civil aircraft aircraft airborne equipment environmental conditions and test methods [ISO 7137 (all parts)].
This standard has made the following editorial changes.
--- Modified standard name.
This standard was proposed by China Aviation Industry Corporation.
This standard is under the jurisdiction of the National Aircraft Standardization Technical Committee (SAC/TC435).
This standard was drafted by Shaanxi Aviation Electric Co., Ltd., Northwestern Polytechnical University, Anhui Zhiyi Technology Consulting Co., Ltd., and China Airlines.
Air Integrated Technology Institute, Guiyang Aviation Motor Co., Ltd.
Introduction
0.1 This standard is part of the series of environmental tests for aircraft equipment. See other environmental tests in ISO 7137.
0.2 The safe operation of aircraft electrical equipment requires good insulation quality and withstand voltage capability. The quality and size of the insulator should be adaptable
The voltage and the weather conditions affected, such as temperature, humidity, atmospheric pressure, and surface contamination. Only adopt the correct test method,
Understanding and verifying the physical properties and status of the insulation enables smaller and more secure designs for electrical equipment.
Insulation resistance measurement and withstand voltage test should be regarded as two different tests. Only the high insulation resistance cannot prove that the insulation has no defects. For example,
When arc cracking occurs in the insulating medium, flashover voltage will be generated.
0.2.1 Voltage withstand test purpose
The withstand voltage test is designed to test the insulation ability against the induction of the electric field.
0.2.2 Insulation resistance test purpose
The insulation resistance measurement is to check whether the electrical equipment has enough insulation resistance value to prevent the leakage current exceeding the allowable value from passing through the insulation.
In particular, under the influence of various climatic conditions such as temperature and humidity and surface contamination conditions, the electrical equipment is maintained by measuring the insulation resistance.
Insulation performance.
0.2.3 Leakage Current Test Purpose
Leakage current detection is suitable for devices with semiconductors. The test voltage depends on the rated voltage of the components.
Aircraft electrical equipment insulation resistance and withstand voltage test method
1 Scope
This standard stipulates the insulation resistance test and withstand voltage test requirements for electrical equipment intended for installation and proposes four types of equipment.
Insulation requirements.
This standard applies to the insulation resistance test and withstand voltage test of electrical equipment intended for installation. This standard does not cover the installed fly
Insulation test of equipment on board.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest version (including all amendments) applies to this document.
ISO 7137 Aircraft Airborne Equipment Environmental Conditions and Test Methods (Aircraft-Environmentalconditionsandtest
Proceduresforairborneequipment)
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Insulation medium meansofinsulation
Gas, liquid, or solid material used for insulation.
3.2
Insulator insulation
The general term for the final product form formed from insulating materials.
3.3
Insulation capacity insulationcapability
The ability to withstand the appropriate level of test voltage.
3.4
Rated voltage ratedvoltage
The voltage value associated with its operating characteristics specified in the marking of electrical equipment.
4 Requirements
4.1 withstand voltage
4.1.1 Test Requirements
The withstand voltage test should be specified in the electrical equipment specification. When the insulation can withstand the test voltage specified in Table 1, the equipment is considered
Has a sufficient insulation capacity. When it is necessary to repeat the withstand voltage test, only 80% of the test voltage specified in Table 1 shall be applied. This regulation
Also applies to equipment that has been used or repaired.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 11 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 7137
How to Download GB/T 35856-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 35856-2018
$85.00