Valid

GB/T 35818-2018Standard method for analysis of forestry biomass-Determination of structural polysaccharides and lignin (English PDF)

林业生物质原料分析方法 多糖及木质素含量的测定

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35818-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

February 6, 2018

Implementation date

September 1, 2018

Scope

GB/T 35818-2018 is the English-translated version of 林业生物质原料分析方法 多糖及木质素含量的测定.

GB/T 35818-2018 is the Chinese national method for determining the structural polysaccharides, cellulose and hemicellulose, and the lignin content of forestry biomass raw materials.

It applies to the quantitative analysis of plant materials such as wood, bamboo, rattan and crop straw.

The standard defines forestry biomass and structural polysaccharides, and explains how the powder sample is prepared: raw materials are sorted into wood, non-wood and other forestry biomass, wood is taken as discs or twigs, cut into thin pieces, mixed by quartering, dried at 105 °C ± 2 °C, ground to pass a 40 mesh sieve and dried to constant weight.

Research and testing laboratories use it for the chemical characterisation of biomass feedstocks. It was issued on 6 February 2018 and has applied since 1 September 2018.

Found what you need?

Document preview — GB/T 35818-2018

National Standard of the People's Republic of China

ICS
65.020.01
Classification
B 60

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Terms and definitions
  • 3 Preparation of Forestry Biomass Powder Samples

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the method for determining the content of polysaccharides and lignin in forestry biomass raw materials.

This standard applies to the quantitative analysis of polysaccharides and lignin in plant materials such as wood, bamboo, rattan, and crop straw.

2 Terms and definitions

The following terms and definitions apply to this document.

2.1 Forestry biomass

The natural organic matter produced by plant life activities such as photosynthesis, which consists of three main polymers. cellulose, hemicellulose and lignin. It is composed of starch, pectin, protein, extractives and other various components, mainly in various forms of wood, bamboo, rattan, straw, fruit shells, etc. The existence of the formula is a renewable natural plant fiber resource.

2.2 Structural polysaccharides

The collective name for all the cellulose and hemicellulose retained after the plant fiber material removes the cell cavity contents and cell wall lignin, also known as Holocellulose.

3 Preparation of Forestry Biomass Powder Samples

3.1 Classification of Forestry Biomass Raw Materials

Sample raw materials are divided into three categories according to their source and form. wood, non-wood raw materials, and other forestry biomass raw materials. Should be no less than 200g.

3.2 Wood raw materials

3.2.1 Collect wood from the same production area and the same tree species, and indicate the species, age, place of production, and year of harvest of the wood.

3.2.2 Take 2 to 3 pieces of discs with a thickness of about 6mm in the upper, middle, and lower parts of the wood material taken, or select a diameter that is not More than 6mm twigs.

3.2.3 After placing the intercepted material in a dry and ventilated place for several days, cut it into small thin wood pieces, and evenly mix the selected materials and collect them according to the quarter method. About 1000 g of uniform flake sample.

3.2.4 The resulting material is placed in an oven at 105°C ± 2°C to be dried for comminution, and the material is crushed by a pulverizer until all passes through 40 mesh. Sieve to give a powder sample.

3.2.5 Take a suitable amount of powder sample in a constant weight container and dry it in an oven at 105°C±2°C until the weight difference between adjacent two weighings is small. At 0.2% (the time difference should not be less than 1h), dry powder samples should be obtained, sealed and stored in a desiccator for use.

3.3 Non-wood raw materials

3.3.1 Collect bamboo, straw, straw, hemp and other raw materials 500g, and record in detail the type, origin, year, month and year of storage.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 35818-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35818-2018

$145.00