GB/T 35791-2017Specification for single-phase-to-ground fault feeder selection device based on traveling waves for neutral non-effectively grounded system (English PDF)
中性点非有效接地系统单相接地故障行波选线装置技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35791-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35791-2017 is the English-translated version of 中性点非有效接地系统单相接地故障行波选线装置技术要求.
GB/T 35791-2017 is the Chinese standard "Specification for single-phase-to-ground fault feeder selection device based on traveling waves for neutral non-effectively grounded system".
Its scope clause reads: This standard specifies the neutral point of non-effective grounding system single-phase ground fault traveling wave line selection device requirements, test methods, test rules Then, signs, labels, instructions, packaging, transportation, storage and so on.
This standard is applicable to the design, manufacture, testing and application of the traveling wave line selection device for the neutral point non-effective grounding system of 66kV and below. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 35791-2017
National Standard of the People's Republic of China
- ICS
- 29.240.01
- Classification
- K 45
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 technical requirements
- 4.1 Environmental conditions
- 4.2 Rated electrical parameters
- 4.3 Power consumption
- 4.4 The main function of the device
- 4.5 The main technical performance of the device
- 4.6 overload
- 4.7 Insulation performance
- 4.8 resistance to heat and humidity
- 4.9 Mechanical Properties
- 4.10 Electromagnetic compatibility requirements
- 4.11 continuous power requirements
- 4.12 Structure and appearance requirements
- 4.13 Safety Requirements
- 5 test methods
- 5.1 Test conditions
- 5.2 Structure and appearance inspection
- 5.3 Changes in ambient temperature on the performance of the test
- 5.4 Transport, storage temperature limit test environment
- 5.5 power changes on the performance of the test
- 5.6 Power consumption test
- 5.7 device function and technical performance test
- 5.8 overload test
- 5.9 Insulation performance test
- 5.10 resistance to heat and humidity performance test
- 5.11 Vibration test
- 5.12 Impact test
- 5.13 crash test
- 5.14 electromagnetic compatibility test
- 5.15 continuous power test
- 5.16 safety requirements test
- 5.17 Functional test
- 6 Inspection rules
- 6.1 Test classification
- 6.2 factory inspection
- 6.3 type test
- 7 logos, labels and operating instructions
- 7.1 signs and labels
- 7.2 Instructions for use
- 8 packaging, transportation, storage
- 8.1 Packaging
- 8.2 Transport
- 8.3 Storage
1 Scope
This standard specifies the neutral point of non-effective grounding system single-phase ground fault traveling wave line selection device requirements, test methods, test rules
Then, signs, labels, instructions, packaging, transportation, storage and so on.
This standard is applicable to the design, manufacture, testing and application of the traveling wave line selection device for the neutral point non-effective grounding system of 66kV and below.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
General specifications for computerized premises GB/T 2887-2011
GB/T 2900.1 Electrotechnical terminology Basic terms
GB/T 2900.49 Electrotechnical terminology Power system protection
GB/T 4208-2017 enclosure rating (IP code)
Basic test methods for protection and safety automatic devices GB/T 7261-2016
Computerized site safety requirements GB/T 9361-2011
GB/T 9969-2008 General instructions for use of industrial products
GB/T 11287-2000 Electrical relays - Part 21. Vibration, shock, bump and earthquakes of measuring relays and protection devices
Test Part 1. Vibration test (sine)
Technical specifications for relay protection and safety automatic devices
Shock and collision tests for measuring relays and protection equipment
Measuring relays and protection equipment - Part 1. General requirements GB/T 14598.2-2011
GB/T 14598.26-2015 Measuring relays and protection equipment - Part 26. EMC requirements
GB/T 14598.27-2008 Measuring relays and protection equipment - Part 27. Product safety requirements
DL/T 667 Telecontrol equipment and systems Part 5. Transmission protocol Part 103. Relay equipment Information Interface supporting standards
DL/T 860 (all parts) Substation communication networks and systems
3 Terms and definitions
GB/T 2900.1 and GB/T 2900.49 defined by the following terms and definitions apply to this document.
3.1 Neutral grounding system
Neutral power distribution system effectively grounded and non-effective grounding in two ways.
3.2 Neutral effective way of grounding
The neutral point is directly grounded, grounded via a small resistor or grounded via a small reactance.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35791-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 35791-2017
$235.00