GB/T 35755-2017Surfactants and detergents - determination of formaldehyde contents (English PDF)
表面活性剂和洗涤剂 甲醛含量的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35755-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35755-2017 is the English-translated version of 表面活性剂和洗涤剂 甲醛含量的测定.
GB/T 35755-2017 is the Chinese standard "Surfactants and detergents - determination of formaldehyde contents". Its scope clause reads: This standard specifies the use of spectrophotometry and liquid chromatography method for the determination of formaldehyde content of surfactants and detergents.
This standard applies to the determination of formaldehyde content of surfactants and detergents.
This standard spectrophotometry is suitable for the determination of the total formaldehyde content of the sample (containing formaldehyde emission body) content, liquid chromatography for the determination of test Free formaldehyde content in the sample.
Found what you need?
Document preview — GB/T 35755-2017
National Standard of the People's Republic of China
- ICS
- 71.100.40
- Classification
- G 72
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3.1 principle
- 3.2 Reagents
- 3.3 Instruments
1 Scope
This standard specifies the use of spectrophotometry and liquid chromatography method for the determination of formaldehyde content of surfactants and detergents.
This standard applies to the determination of formaldehyde content of surfactants and detergents.
This standard spectrophotometry is suitable for the determination of the total formaldehyde content of the sample (containing formaldehyde emission body) content, liquid chromatography for the determination of test
Free formaldehyde content in the sample.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 6682 analytical laboratory water specifications and test methods
QB/T 2739-2005 Common test methods for cleaning products Preparation of test solution for titration analysis (volumetric analysis)
3 total formaldehyde (containing formaldehyde emission body) content determination --- Spectrophotometry
3.1 principle
Formaldehyde reacts with acetylacetone in the presence of ammonium acetate to form a yellow complex, which is measured with a spectrophotometer at a wavelength of 410 nm
Absorbance of the compound.
3.2 Reagents
Unless otherwise specified, only reagents identified as analytical grade and Grade III water conforming to GB/T 6682 are used in the analysis.
3.2.1
Glacial acetic acid.
3.2.2
Ammonium acetate.
3.2.3
isopropanol.
3.2.4
Acetylacetone.
3.2.5 Preparation of Acetylacetone Reagent
Dissolve 75 g of ammonium acetate (3.2.2) in about.200 mL of water, add 1.0 mL of acetylacetone (3.2.4)
And 1.5mL glacial acetic acid (3.2.1), diluted with water to 500mL mix. This reagent should be used now with.
3.2.6 Preparation of reference reagents
Prepared according to 3.2.5 but without acetylacetone.
3.3 Instruments
Common laboratory equipment and the following.
3.3.1
Spectrophotometer, the wavelength range of 360nm ~ 800nm, with a light path length of 10mm cuvette.
3.3.2
water bath, can be controlled at (60 ± 1) °C.
3.3.3
Analytical balance, flu 0.1mg.
3.3.4 volumetric flask
50mL, 100mL, 500mL.
3.3.5 Pipette
1mL, 2mL, 5mL, 10mL, 15mL.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35755-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 35755-2017
$145.00