GB/T 35721-2017Distributed fault diagnosis system of transmission lines (English PDF)
输电线路分布式故障诊断系统
This is a limited preview
Buy now to download the full PDF (30 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35721-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35721-2017 is the English-translated version of 输电线路分布式故障诊断系统.
GB/T 35721-2017 is the Chinese standard "Distributed fault diagnosis system of transmission lines".
Its scope clause reads: This standard specifies the transmission line distributed fault diagnosis system classification and system components, technical requirements, test methods, test rules to And product logo, packaging, transportation, storage requirements.
This standard applies to 110 (66) kV and above AC-DC transmission line voltage distribution fault diagnosis system, 35kV AC line Can refer to adopt. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 35721-2017
National Standard of the People's Republic of China
- ICS
- 29.240.20
- Classification
- F 23
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 classification and system composition
- 5 technical requirements
- 6 test methods
- 7 Inspection rules
- 8 logo, packaging, transportation and storage
- Appendix A (informative) typical fault traveling wave current waveform
- Appendix B (Normative) Transmission Line Fault Diagnosis Based on Distributed Monitoring
- Appendix C (Normative) Monitoring Terminal Installation Construction and Maintenance Specifications
- Appendix D (Normative) Failure diagnosis simulation test method
1 Scope
This standard specifies the transmission line distributed fault diagnosis system classification and system components, technical requirements, test methods, test rules to
And product logo, packaging, transportation, storage requirements.
This standard applies to 110 (66) kV and above AC-DC transmission line voltage distribution fault diagnosis system, 35kV AC line
Can refer to adopt.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 2317.1 Test methods for electrical fittings - Part 1. Mechanical tests
GB/T 2317.2 Test methods for electrical fittings - Part 2. Corona and radio interference tests
GB/T 2423.1 Environmental testing for electric and electronic products Part 2. Test methods Test A. Low temperature
GB/T 2423.2 Environmental testing for electric and electronic products Part 2. Test methods Test B. High temperature
GB/T 2423.4 Environmental testing for electric and electronic products Part 2. Test methods Test Db. Alternating hot and humid (12h 12h cycle)
GB/T 2423.10 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal)
GB/T 2900.51 Electrotechnical terminology overhead lines
GB/T 4208 enclosure protection (IP code)
GB/T 6587 electronic measuring instruments common specifications
GB/T 16422.1 Plastics - Laboratory exposure test methods - Part 1. General
GB/T 16422.2 Plastics - Laboratory exposure test methods - Part 2. Xenon arc lamps
GB/T 16927.4 high voltage and high current test techniques - Part 4. Test current and measurement system definitions and requirements
GB/T 17626.2 Electromagnetic compatibility test and measurement techniques Electrostatic discharge immunity test
GB/T 17626.3 Electromagnetic compatibility testing and measurement techniques RF electromagnetic field immunity test
GB/T 17626.8 Electromagnetic compatibility test and measurement techniques Power frequency magnetic field immunity test
GB/T 17626.9 Electromagnetic compatibility test and measurement techniques pulsed magnetic field immunity test
GB/T 21671 LAN technology based on the acceptance test specification
GB/T 31235 ± 800kV DC transmission line fittings technical specifications
Design code for 110 kV ~ 750 kV overhead transmission lines GB 50545
3 Terms and definitions
GB/T 2900.51 defined and the following terms and definitions apply to this document.
3.1 Distributed fault diagnosis system
By the distributed installation of transmission lines in the wire monitoring terminal and the central station, the user system, the transmission line trip fault
Point positioning and fault identification system.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35721-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 35721-2017
$535.00