GB/T 35720-2017Motorized operated damper for household and similar use (English PDF)
家用和类似用途电动风门
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35720-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35720-2017 is the English-translated version of 家用和类似用途电动风门.
GB/T 35720-2017 is the Chinese standard "Motorized operated damper for household and similar use". Its scope clause reads: This standard specifies the terms and definitions, basic parameters, technical requirements, test methods, and inspections for household and similar use stepper motors.
Inspection rules and signs, packaging, transportation, storage and so on. This standard applies to the rated voltage is not greater than the DC 24V, household and similar use of refrigeration equipment (such as air-cooled refrigerators, air-cooled freezers, etc.)
Stepper motor electric throttle (hereinafter referred to as electric throttle). Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 35720-2017
National Standard of the People's Republic of China
- ICS
- 97.120
- Classification
- K 32
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Stepper motor electric damper
- 3.2 Lock the lock
- 3.3 Leakagerate leakage
1 Scope
This standard specifies the terms and definitions, basic parameters, technical requirements, test methods, and inspections for household and similar use stepper motors.
Inspection rules and signs, packaging, transportation, storage and so on.
This standard applies to the rated voltage is not greater than the DC 24V, household and similar use of refrigeration equipment (such as air-cooled refrigerators, air-cooled freezers, etc.)
Stepper motor electric throttle (hereinafter referred to as electric throttle).
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 2423.1 Environmental testing for electric and electronic products Part 2. Test methods Test A. Low temperature
GB/T 2423.2 Environmental testing for electric and electronic products Part 2. Test methods Test B. High temperature
GB/T 2423.10 Environmental testing for electric and electronic products Part 2. Test methods Tests Fc and Guidelines. Vibration (sine)
GB/T 2423.17 Environmental testing for electric and electronic products Part 2. Test methods Test Ka. Salt spray
GB/T 2423.22 Environmental test Part 2. Test method Test N. Temperature change
GB/T 2828.1 Count Sampling Inspection Procedures Part 1. Batch Inspection Sampling Plans Retrieved by Acceptance Quality Limit (AQL)
GB/T 5169.12 Fire hazard testing for electric and electronic products - Part 12. Glow/hot wire basic test methods - Burning of materials
Hot Wire Flammability Index (GWFI) Test Method
GB/T 6461-2002 Ratings of specimens and specimens after corrosion tests of metals and other inorganic coatings on metal substrates
GB/T 14536.1 Automatic electrical controls for household and similar use Part 1. General requirements
GB/T 18313 Acoustic information technology equipment and communication equipment air noise measurement
GB/T 22685-2008 Household and similar controller packaging and marking
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Stepper motor electric damper
A type of motor driven by a stepper motor, which mainly adjusts the amount of cold air or directly cuts off the flow of cold air in the cooling air duct system to regulate and cut off the air flow.
Dual-acting control elements are mainly used in air-cooled refrigerators, air-cooled freezers and a series of air duct systems with cooling requirements.
3.2 Lock the lock
When the door of the electric damper is in the closed position, the electric damper motor applies a certain amount of driving in the closing direction so that the door panel is opposite the door.
The frame generates a closing force; or, when the door of the electric damper is in the fully open position, the electric damper motor applies a certain amount to the opening direction.
The drive, so that the door hinge pivot torque.
3.3 Leakagerate leakage
When the electric damper is in the closed lock state, under the condition that a predetermined air pressure is applied in a direction to open the door panel, the door frame door of the electric damper is passed […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35720-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 35720-2017
$165.00