GB/T 35716-2017Overload protectors for hermetic motor-compressors (English PDF)
全封闭电动机-压缩机用热保护器
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35716-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35716-2017 is the English-translated version of 全封闭电动机-压缩机用热保护器.
GB/T 35716-2017 is the Chinese standard "Overload protectors for hermetic motor-compressors".
Its scope clause reads: This standard specifies the fully enclosed refrigeration motor - compressor thermal protector (hereinafter referred to as "protector") product type, name and basic Parameters and dimensions, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to the installation of household and similar refrigeration equipment with a fully enclosed refrigeration motor - the surface of the compressor housing or internal protector. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 35716-2017
National Standard of the People's Republic of China
- ICS
- 97.120
- Classification
- K 32
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Protector
- 3.2 External protector
- 3.3 Built-in protector
- 3.4 Action temperature
1 Scope
This standard specifies the fully enclosed refrigeration motor - compressor thermal protector (hereinafter referred to as "protector") product type, name and basic
Parameters and dimensions, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to the installation of household and similar refrigeration equipment with a fully enclosed refrigeration motor - the surface of the compressor housing or internal protector.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2423.1 Environmental testing for electric and electronic products Part 2. Test methods Test A. Low temperature
GB/T 2423.2 Environmental testing for electric and electronic products Part 2. Test methods Test B. High temperature
GB/T 2423.3 Environmental testing Part 2. Test methods Test Cab. Constant hot and humid test
GB/T 2423.10 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal)
GB/T 2423.22 Environmental testing Part 2. Test methods Test N. Temperature changes
GB/T 2828.1 Sampling procedures for sampling inspection - Part 1. Batch inspection sampling plan retrieved by acceptance quality limit (AQL)
GB/T 14536.1-2008 Household and similar electrical automatic control Part 1 - General requirements
GB/T 14536.5 Household and similar electrical automatic control seal and semi-seal Motor-compressor motor thermal protector
Special requirements
GB/T 22685 Household and similar controller packaging and labeling
UL758 Electrical wiring wire and cable and test methods (StandardforApplianceWiringMaterial)
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Protector
Installed inside or outside the motor compressor, to prevent the motor - compressor due to over-current and/or over-temperature of the automatic controller.
3.2 External protector
Installed in fully enclosed refrigeration motor - the compressor housing surface protection.
3.3 Built-in protector
Installed in the fully enclosed refrigeration motor - compressor housing inside the protector.
3.4 Action temperature
Protector does not carry current or carrying signal current circumstances, the static and dynamic contact separation temperature.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35716-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 35716-2017
$295.00