GB/T 35582-2017Sulfur and nitrogen elemental analyzers (English PDF)
硫氮元素测定仪
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35582-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35582-2017 is the English-translated version of 硫氮元素测定仪.
GB/T 35582-2017 is the Chinese standard "Sulfur and nitrogen elemental analyzers". Its scope clause reads: This standard specifies the sulfur nitrogen element detector requirements, test methods, inspection rules, signs, instructions, packaging, transportation and storage.
This standard applies to the use of chemiluminescence method to measure nitrogen and ultraviolet fluorescence sulfur sulfur nitrogen analyzer (hereinafter referred to as instrument). Its clauses include requirements.
Found what you need?
Document preview — GB/T 35582-2017
National Standard of the People's Republic of China
- ICS
- 71.040.10
- Classification
- N 53
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 requirements
- 3.1 normal working conditions
- 3.2 measuring range
- 3.3 appearance requirements
1 Scope
This standard specifies the sulfur nitrogen element detector requirements, test methods, inspection rules, signs, instructions, packaging, transportation and storage.
This standard applies to the use of chemiluminescence method to measure nitrogen and ultraviolet fluorescence sulfur sulfur nitrogen analyzer (hereinafter referred to as instrument).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191-2008 Packaging - Pictorial signs
GB/T 2829-2002 periodic inspection count sampling procedures and tables (for the stability of the test process)
GB 4793.1-2007 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1. General requirements
Analytical instruments - Environmental testing methods
General technical requirements for packaging of electromechanical products
NB/SH/T 0704-2010 Determination of nitrogen content in petroleum and petroleum products boat injection chemiluminescence
SH/T 0657-2007 Determination of trace amounts of nitrogen in liquid petroleum hydrocarbons - Oxidative combustion and chemiluminescence
SH/T 0689-2000 Determination of total sulfur content of light hydrocarbons and engine fuels and other oils (UV fluorescence method)
3 requirements
3.1 normal working conditions
Instrument normal working conditions should be met.
a) Ambient temperature .5 °C ~ 35 °C;
b) Relative humidity. not more than 80%;
c) Power supply. AC voltage .220V ± 22V; frequency. 50Hz ± 1Hz;
d) The instrument should avoid direct light;
e) There should be no strong electromagnetic field around the instrument except the earth magnetic field;
f) The work surface of the instrument should be smooth and firm.
3.2 measuring range
Instrument according to the different forms of the measured substance is divided into the following measurement range.
a) The liquid sample measurement range of 0.2mg/L ~ 5000mg/L, the range of linear correlation coefficient r >= 0.999;
b) The measurement range of the gas sample is 0.2mg/m3 ~ 5000mg/m3, the linear correlation coefficient of each range is r>=0.999;
c) The measurement range of the solid sample is 1.0mg/kg ~ 5000mg/kg, the linear correlation coefficient of each range is r>=0.999.
3.3 appearance requirements
The appearance of the instrument should meet the following requirements.
a) The appearance of the instrument is tidy, clean, coated on the surface, there is no obvious peel, abrasion, exposed bottom and dirt on the coating;
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35582-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 35582-2017
$145.00