Valid

GB/T 35458-2017Costumes (English PDF)

游戏服装

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35458-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

July 1, 2018

Scope

GB/T 35458-2017 is the English-translated version of 游戏服装.

GB/T 35458-2017 is the Chinese standard "Costumes". Its scope clause reads: This standard specifies the terms and definitions, requirements, inspection methods, inspection rules as well as marking, packaging, transportation and storage of costumes.

It is applicable to the costumes (including garments and accessories) produced with woven fabric as major raw materials. Its clauses include terms and definitions; requirements.

Found what you need?

Document preview — GB/T 35458-2017

National Standard of the People's Republic of China

ICS
61.020
Classification
Y 76

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword i
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Requirements
  • 5 Inspection methods
  • 6 Inspection rules
  • 7 Marking, packaging, transportation and storage

1 Scope

This standard specifies the terms and definitions, requirements, inspection methods, inspection rules as well as marking, packaging, transportation and storage of costumes.

It is applicable to the costumes (including garments and accessories) produced with woven fabric as major raw materials.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.

GB/T 250 Textiles - Tests for colour fastness - Grey scale for assessing change in colour

GB/T 1335 (All parts) Standard sizing systems for garments

GB/T 3921-2008 Textiles - Tests for colour fastness - Colour fastness to washing with soap or soap and soda

GB/T 4802.1-2008 Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: Circular locus method

GB/T 4841.3 Colour cards of standard depths for dyeing with dyestuffs 2/1, 1/3, 1/6, 1/12, 1/25

GB/T 5296.4 Instructions for use of products of consumer interest - Part 4: textiles and apparel

GB 6675.2-2014 Safety of toys - Part 2: Mechanical and physical properties

GB 6675.3 Safety of toys - Part 3: Flammability

GB 6675.4 Safety of toys - Part 4: Migration of certain elements

GB 7247.1 Safety of laser products - Part 1: Equipment classification and requirements

GB/T 8427-2008 Textiles - Tests for colour fastness - Colour fastness to artificial light: Xenon arc fading lamp test

GB/T 8629-2001 Textiles - Domestic washing and drying procedures for textile testing

GB/T 8630 Textiles - Determination of dimensional change in washing and drying

GB/T 14801 Test method for skewness and bow in woven and knitted fabrics

GB/T 15557 Standard terminology relating to apparel

GB 18401 National general safety technical code for textile products

GB/T 19719 Jewelry - Determination of the release of nickel - Method of spectrometry

GB 19865-2005 Electric toys - Safety

GB/T 19976-2005 Textiles - Determination of bursting strength - Steel ball method

GB/T 21294 Testing methods of physical and chemical performance of garments

GB/T 21295-2014 Requirements of physical and chemical performance of garments

GB 21550 Restriction of hazardous in polyvinyl chloride artificial leather

GB/T 29862 Textiles - Identification of fiber content

GB/T 30157 Textiles - Determination of total content of lead and cadmium

GB 31701 Safety technical code for infants and children textile products

GB/T 31907 Method of garment measurement

FZ/ T 80002 Marking, packaging, transportation and storage for garments

FZ/T 80004 Rule for garments delivery inspection

GSB 16-1523-2013 Knitted fabric fuzzing and pilling sample photograph

3 Terms and definitions

For the purposes of this standard, the terms and definitions specified in GB/T 15557 as well as the following ones apply.

3.1 costumes

certain clothing wearing to play certain characters in animations, games and films, or to create self-originating styling rather than everyday dressing (including festive party costumes, role-playing costumes, stage performance costumes, etc.)

3.2 costumes with electrical function(s)

costumes of which at least one function requires electricity

3.3 printed foil

the aluminum layer in the anodized aluminum is transferred to the surface of the printed material based on the principle of hot press transfer to form a special pattern with metal effect

3.4 printed glitter

uniformly glue the coloured or transparent plastic powder to the adhesive material to form a pattern with glittering effect

3.5 accessories

accessories made of various materials to match with the garment; which may match with costumes or be used as a stand-alone product

4 Requirements

4.1 Instructions for use

The instructions for use of finished products shall be in accordance with GB/T 5296.4 and GB 31701. Infants and children garment products shall be accompanied by a warning sign (Example 1). Costumes with electrical function(s) and their accessories shall also comply with the provisions as specified in GB 19865-2005, Clause 7. Costumes and their accessories that may cause hazard to infants and children aged 36 months or below shall be accompanied by a warning sign (Example 2).

Example 1: "Warning: This product is not an everyday dressing and shall be attended by an adult when worn at a specific time and occasion."

Example 2: "Warning: This product contains small components and is not suitable for infants and children aged 36 months or below."

4.2 Size specification

4.2.1

The size setting shall be selected in accordance with GB/T 1335.

4.2.2

The specification for the primary parts of finished products shall be designed independently in accordance with the relevant requirements of GB/T 1335.

4.3 Raw materials

4.3.1 Shell fabric

The shell fabric complying with the quality requirements of this standard shall be adopted.

4.3.2 Lining

Lining suitable for the applied shell fabric and complying with the relevant quality requirements of this standard shall be adopted.

4.3.3 Filler

The filler complying with the quality requirements of relevant standards shall be selected according to the national standards relating to filler.

4.3.4 Accessory materials
4.3.4.1 Lining cloth

The lining cloth suitable to the property of the used shell fabric shall be adopted and its quality shall comply with the requirements of this standard.

4.3.4.2 Lace

The lace suitable to the used shell fabric shall be adopted and its quality shall comply with the requirements of this standard.

4.3.4.3 Stitch thread, rope belt and elastic ribbon

The stitch thread, rope belt and elastic ribbon (except for ornamental thread and belt) suitable to the performance of the used shell fabric, lining and accessory materials shall be adopted.

4.3.4.4 Button, zipper and other accessories

The buttons (except ornamental button), zipper and other accessories suitable for the used shell fabric shall be adopted. The surface of button, ornamental button, zipper and other accessories shall be smooth and free of burr, damage, defect and accessible sharp tip or edge. Zippers shall mesh well and run smoothly.

Note: Accessible sharp tips and edges are those on finished product that are possible to cause harm to human skin under normal wearing.

4.4 Warp and weft yarns

The front bottom hem is free from any upwarp. The yarn skewness of the back and sleeve shall not be greater than 3% and that of the trousers shall not be greater than 3% as well (except for special design).

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 35458-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35458-2017

$195.00