GB/T 35381.12-2020Agricultural and forestry tractors and machinery Serial control and communication data network - Part 12: Diagnostic service (English PDF)
农林拖拉机和机械 串行控制和通信数据网络 第12部分：诊断服务
This is a limited preview
Buy now to download the full PDF (49 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35381.12-2020 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
November 19, 2020
Implementation date
March 1, 2021
Scope
GB/T 35381.12-2020 is the English-translated version of 农林拖拉机和机械 串行控制和通信数据网络 第12部分：诊断服务.
GB/T 35381.12-2020 is the Chinese standard "Agricultural and forestry tractors and machinery Serial control and communication data network - Part 12: Diagnostic service".
Its scope clause reads: GB/T 35381 specifies the serial control and communication data network of agricultural and forestry tractors and suspended, semi-suspended, traction or self-propelled machines.
Its purpose is to standardize data transmission methods and formats between sensors, drives, control components, information storage and display units. These devices Installed on tractors or implements or standard equipment on them.
This part of GB/T 35381 applies to network diagnostic systems. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 35381.12-2020
National Standard of the People's Republic of China
- Classification
- B 90
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Symbols and abbreviations
- 5 General
- 6 Requirements
- 6.1 ISO 11783 diagnosis
- 6.2 Network Information
- 6.3 Network Statistics
- 6.4 Control function information
- 6.5 Function
- 6.6 Control function diagnosis
- 6.7 ISO Latin 1 character set
- Appendix A (Normative Appendix) Definition of Diagnostic Information Parameters
- Appendix B (Normative Appendix) Definition of Diagnostic Information Message
- Appendix C (Normative Appendix) Network Configuration
- Appendix D (informative appendix) Network configuration interface example. network information interface
- Appendix E (Normative Appendix) Definition of Failure Mode Identifier
- References
1 Scope
GB/T 35381 specifies the serial control and communication data network of agricultural and forestry tractors and suspended, semi-suspended, traction or self-propelled machines.
Its purpose is to standardize data transmission methods and formats between sensors, drives, control components, information storage and display units. These devices
Installed on tractors or implements or standard equipment on them.
This part of GB/T 35381 applies to network diagnostic systems.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
ISO 11783-1 Agricultural and Forestry Tractors and Machinery Serial Control and Communication Data Network Part 1.Data Communication General Standard
ISO 11783-2 Agricultural and Forestry Tractors and Machinery Serial Control and Communication Data Network Part 2.Physical Layer
ISO 11783-3 Agricultural and Forestry Tractors and Machinery Serial Control and Communication Data Network Part 3.Data Link Layer
ISO 11783-5 Agricultural and Forestry Tractors and Machinery Serial Control and Communication Data Network Part 5.Network Management
ISO 11783-7 Agricultural and Forestry Tractors and Machinery Serial Control and Communication Data Network Part 7.Machine Message Application Layer
ISO 14229-1 Unified Diagnostic Service (UDS) for Road Vehicles Part 1.Specifications and Requirements
SAEJ1939-73 Application layer diagnosis
3 Terms and definitions
The following terms and definitions defined by ISO 11783-1, ISO 14229-1 and SAEJ1939-73 apply to this document.
The ISO and IEC standardized term database address is.
GB 10395.1 | GB 16151.1 | GB 10395.6 | GB/T 35381.14 | GB/T 35381.10 | GB/T 35381.13 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 49 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 11783 · ISO 14229
How to Download GB/T 35381.12-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 35381.13-2017 — Tractors and machinery for agriculture and forestry -- Serial control and communications data network -- Part 13: File server
GB/T 35381.11-2017 — Tractors and machinery for agricultural and forestry -- Serial control and communications data network -- Part 11: Mobile data element dictionary
GB/T 35381.14-2020 — Agricultural and forestry tractors and machinery Serial control and communication data network - Part 14: Sequence control
Secure payment via Stripe
Payments accepted
GB/T 35381.12-2020
$420.00