GB/T 35362-2017Marine oil lubrication stern tube bearing (English PDF)
船用油润滑艉管轴承
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35362-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35362-2017 is the English-translated version of 船用油润滑艉管轴承.
GB/T 35362-2017 is the Chinese standard "Marine oil lubrication stern tube bearing". Its scope clause reads: This standard specifies the type, requirements, test methods, inspection rules, standard of marine oil lubrication pipe bearing (hereinafter referred to as "pipe bearing") Log, packaging, transportation and storage.
This standard applies to the shaft centerline and the water distance of not more than 20m, line speed of 2.0m/s ~ 10m/s, the bearing pressure is not greater than 0.8MPa, the working temperature is not higher than 65 °C shaft bearing design, manufacture and acceptance. Its clauses include type.
Found what you need?
Document preview — GB/T 35362-2017
National Standard of the People's Republic of China
- ICS
- 47.020.20
- Classification
- U 48
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 type
- 3.1 classification
1 Scope
This standard specifies the type, requirements, test methods, inspection rules, standard of marine oil lubrication pipe bearing (hereinafter referred to as "pipe bearing")
Log, packaging, transportation and storage.
This standard applies to the shaft centerline and the water distance of not more than 20m, line speed of 2.0m/s ~ 10m/s, the bearing pressure is not greater than
0.8MPa, the working temperature is not higher than 65 °C shaft bearing design, manufacture and acceptance.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Cast bearing alloys
Casting copper and copper alloys GB/T 1176-2013
Ductile iron parts
Casting carbon steel parts for general engineering use GB/T 11352-2009
GB/T 13384 mechanical and electrical product packaging General technical conditions
Casting technology of tin - base alloy bearings
3 type
3.1 classification
Tube bearings according to the installation location is divided into different front bearings, bearings after two. Front bearing, rear bearing schematic diagram shown in Figure 1. According to the use of the environment
Divided into different types of sea-boat bearings A, river boat bearings B-type.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35362-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 35362-2017
$145.00