GB/T 35357-2017Test method for asbestos content of marine paint (English PDF)
船舶涂料中石棉含量测定方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35357-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35357-2017 is the English-translated version of 船舶涂料中石棉含量测定方法.
GB/T 35357-2017 is the Chinese standard "Test method for asbestos content of marine paint". Its scope clause reads: This standard specifies the test principle, equipment, reagents, sample preparation, test reports, etc. of asbestos determination in marine coatings.
This standard applies to the determination of asbestos content in ship and marine engineering coatings, but also applies to coatings for other purposes asbestos content Determination.
The detection limit of asbestos quantitative analysis method stipulated in this standard is >=0.1%. Its clauses include equipment.
Found what you need?
Document preview — GB/T 35357-2017
National Standard of the People's Republic of China
- ICS
- 47.020.05
- Classification
- U 05
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 equipment
- 4 reagent
- 5 test principle
- 6 Sample Preparation
- 7 asbestos qualitative analysis
- 8 Asbestos Quantitative Analysis
- 9 Test Report
- Appendix A (Informative) Common paint types and their applicable solvents
- Appendix B (Normative) X-ray diffractometer technical conditions
- Appendix C (Normative) Standard asbestos mineral X-ray diffraction main characteristic peaks and maps
- Appendix E (Normative) Asbestos standard curve drawing and asbestos-related standard absorption correction method
1 Scope
This standard specifies the test principle, equipment, reagents, sample preparation, test reports, etc. of asbestos determination in marine coatings.
This standard applies to the determination of asbestos content in ship and marine engineering coatings, but also applies to coatings for other purposes asbestos content
Determination.
The detection limit of asbestos quantitative analysis method stipulated in this standard is >=0.1%.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 3186 Paints, varnishes and varnish and varnish raw materials sampling
GB/T 6003.1 Test sieves - Technical requirements and testing - Part 1. Wire mesh sieve test sieves
GB/T 6682 analytical laboratory water specifications and test methods
GB/T 15896 chemical formate formic acid
GB/T 24665 polarizing microscope
3 equipment
Equipment generally includes.
a) Porcelain crucible with volume of 20mL ~ 50mL.
b) Analyze the balance to the nearest 0.01 mg.
c) high temperature furnace can be heated to (450 ± 10) °C.
d) Heated blast drying oven with forced ventilation, accurate to ± 2 ° C.
e) Thermostatic water bath. Accurate to ± 2 °C.
f) X-ray diffractometer (XRD). For the polycrystalline X-ray diffractometer, the overall stability of the instrument is better than ± 3% (6h)
Angle measurement repeatability better than 0.02 °.
g) Polarizing microscope (PLM). Performance should meet the technical requirements of polarizing microscope GB/T 24665, with 10 times, 25 times,
40 times the dispersive staining objective lens or similar multiples of the lens.
h) high-speed centrifuge speed of 3000r/min ~ 15000r/min.
i) Other laboratory equipment.
1) Fluororesin adhesive glass fiber filter diameter 25mm;
2) Micropipettes with ranges of 50 µL and 1000 µL respectively;
3) Standard sieve with aperture of.200µm ~ 355µm, meeting the requirements of GB/T 6003.1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35357-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 35357-2017
$240.00