GB/T 35355-2017Determination of water-soluble salts for marine equipment—Sodium chloride standard method (English PDF)
船用设备用水中盐分的测定 基准氯化钠法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35355-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35355-2017 is the English-translated version of 船用设备用水中盐分的测定 基准氯化钠法.
GB/T 35355-2017 is the Chinese standard "Determination of water-soluble salts for marine equipment—Sodium chloride standard method".
Its scope clause reads: This standard specifies the principle of marine salt water measurement equipment, reagents, equipment, sampling, analysis steps, the results of calculation, precision Degree, quality and control, test reports and more.
This standard applies to marine equipment water (including boiler water, cooling water, fresh water, etc.) in the determination of salt. Measurement range is not greater than 0.400%. Its clauses include terms and definitions; principle; reagent.
Found what you need?
Document preview — GB/T 35355-2017
National Standard of the People's Republic of China
- ICS
- 47.020.05
- Classification
- U 05
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 principle
- 5 reagent
1 Scope
This standard specifies the principle of marine salt water measurement equipment, reagents, equipment, sampling, analysis steps, the results of calculation, precision
Degree, quality and control, test reports and more.
This standard applies to marine equipment water (including boiler water, cooling water, fresh water, etc.) in the determination of salt. Measurement range is not greater than
0.400%.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Laboratory use specifications and test methods for analysis GB/T 6682-2008
GB/T 6904 industrial circulating cooling water and boiler water pH measurement
Methods for the analysis of water for boiler and cooling water - Method for the collection of water samples
Determination of conductivity of boiler water and cooling water GB/T 6908
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Salt ratio ratioofsalinityandconductivity
Conductivity and salt ratio.
4 principle
Marine equipment water is the main component of salt dissolved in water, a strong electrolyte. By measuring the conductivity of aqueous solution, based on salt conductivity ratio,
You can calculate the water content of marine equipment water.
5 reagent
5.1
All reagents and water, unless otherwise specified, analytical grade and above should be used chemical reagents and newly prepared in line with GB/T 6682-
2008 and the provisions of the second and above water.
5.2
Sodium chloride storage solution Weigh 50.0000g sodium chloride (reference reagent) was dissolved in.200mL water, transferred to 500mL volumetric flask,
Dilute to the mark with water and mix well. This solution is 1 mL containing 0.1 g of sodium chloride.
5.3
hydrochloric acid solution .0.1mol/L.
5.4
sodium hydroxide solution .0.1mol/L.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35355-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 35355-2017
$85.00