GB/T 35354-2017Ships and marine technology -- Large yachts -- Deck crane and access gangways strength requirements (English PDF)
船舶和海上技术 大型游艇甲板起重机和登船梯强度要求
Also coversGBT35354-2017
This is a limited preview
Buy now to download the full PDF (10 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35354-2017 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35354-2017 is the English-translated version of 船舶和海上技术 大型游艇甲板起重机和登船梯强度要求.
GB/T 35354-2017 — This standard specifies the minimum structural size requirements for large yachts lifting machinery. This standard applies to cranes, boarding ladders (including gangway) and used as lifting machinery boarding ladder.
This standard does not apply to lifesaving equipment lifting facilities, these facilities with reference to other generally accepted rules and/or international norms.
The content of this standard mainly involves working level, applied load, design standards, allowable stress, strength check, flexible stability test and even Then accessories and so on.
Found what you need?
Document preview — GB/T 35354-2017
National Standard of the People's Republic of China
- ICS
- 47.020.40
- Classification
- U 24
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard uses the translation method identical with ISO 11209:2012 "Ship and marine technology Large yacht deck cranes and boarding ladder Intensity requirements. " the documents of our country that are consistent with the corresponding international documents that are normative references in this standard are as follows.
--- GB/T 19916-2005 boat main data (ISO 8666:2012, IDT) this standard proposed by China Shipbuilding Industry Corporation.
This standard by the National Marine Standardization Technical Committee (SAC/TC12) centralized.
1 Scope
This standard specifies the minimum structural size requirements for large yachts lifting machinery.
This standard applies to cranes, boarding ladders (including gangway) and used as lifting machinery boarding ladder.
This standard does not apply to lifesaving equipment lifting facilities, these facilities with reference to other generally accepted rules and/or international norms.
The content of this standard mainly involves working level, applied load, design standards, allowable stress, strength check, flexible stability test and even Then accessories and so on.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document.
ISO 8666 boat main data (Smalcraft-Principaldata)
3 Terms and definitions
The following terms and definitions apply to this document.
Large yacht Captain LH for sports, leisure, and business boats larger than or equal to 24 m.
Note. For the definition of LH, see ISO 8666.
Lifting appliances liftingappliance Used for loading and unloading heavy equipment on board, but not for boarding and disembarking personnel.
Boarding ladder accessgangway Facilities for boarding/disembarking personnel.
Life-saving equipment lifesavingappliance Life-saving vehicles such as lifeboats, rescue boats, inflatable liferafts and rigid liferafts.
Favorable climate conditions favourableweathercondition Stable wind direction and no wind above Class 4 Beaufort Force.
Calm water
The wave height of the wave is not more than 0.3m.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 10 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 8666
How to Download GB/T 35354-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 35354-2017
$205.00