GB/T 35268-2017Textiles—Quantitative chemical analysis—Mixtures of polytetrafluoroethylene and certain other fibres (English PDF)
纺织品 定量化学分析 聚四氟乙烯纤维与某些其他纤维的混合物
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35268-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35268-2017 is the English-translated version of 纺织品 定量化学分析 聚四氟乙烯纤维与某些其他纤维的混合物.
GB/T 35268-2017 is the Chinese standard "Textiles—Quantitative chemical analysis—Mixtures of polytetrafluoroethylene and certain other fibres". Its scope clause reads: This standard specifies the method for the determination of the content of two mixtures of Teflon fibers by chemical analysis.
This standard applies to polytetrafluoroethylene fibers and some protein fibers (wool, silk, etc.), cellulose fibers (cotton, linen, viscose Etc.), two components of acetate, polyacrylonitrile, spandex, polyamide, polyester, polyimide and polyphenylene sulfide fibers mixture. Its clauses include principle; test rules.
Found what you need?
Document preview — GB/T 35268-2017
National Standard of the People's Republic of China
- ICS
- 59.080.01
- Classification
- W 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 principle
- 4 test rules
- 5 Teflon fibers and some protein fiber mixture (hypochlorite method)
1 Scope
This standard specifies the method for the determination of the content of two mixtures of Teflon fibers by chemical analysis.
This standard applies to polytetrafluoroethylene fibers and some protein fibers (wool, silk, etc.), cellulose fibers (cotton, linen, viscose
Etc.), two components of acetate, polyacrylonitrile, spandex, polyamide, polyester, polyimide and polyphenylene sulfide fibers mixture.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2910.1 Textiles - Quantitative Chemical Analysis Part 1. General Principles of Testing
GB/T 2910.4 Textiles Quantitative Chemical Analysis Part 4. Some protein fibers and some other fiber mixture (times
Chlorate method)
GB/T 2910.7 Textiles Quantitative Chemical Analysis Part 7. Polyamide fibers and some other fiber mixtures (formic acid method)
GB/T 2910.11 Textiles - Quantitative chemical analysis - Part 11. Mixtures of cellulose fibers and polyester fibers (Sulfuric acid method)
3 principle
After qualitative identification of the sample, select the appropriate reagent to dissolve one of the components, the residue was collected, washed, dried and weighed, then amended
After the mass calculated polytetrafluoroethylene fibers and some other fiber mass percentage.
Note. The identification method can be FZ/T 01057 and Appendix A method.
4 test rules
Test analytical reagents, distilled water and equipment, sample preparation, test procedures, samples and insoluble fiber drying, cooling, weighing and analysis
The results are calculated according to GB/T 2910.1 regulations. If the test method, the calculation of test results and the above provisions are different, then with
Body test methods are listed.
5 Teflon fibers and some protein fiber mixture (hypochlorite method)
5.1 principle
The hypochlorite solution is used to dissolve the protein fibers from the mixture of known dry mass, and the residue is collected, washed, dried and weighed
Weight; calculated using the corrected mass of PTFE fibers as a percentage of the dry mass of the mixture. The difference results in the quality of the protein fiber percentage.
5.2 Reagents
Use the reagents specified in GB/T 2910.4.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35268-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 35268-2017
$205.00