Valid

GB/T 35257-2017Textiles - Quantitative chemical analysis - Mixtures of chitosan and certain other fibers(method using acetic acid) (English PDF)

纺织品 定量化学分析 壳聚糖纤维与某些其他纤维的混合物 (乙酸法)

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35257-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

July 1, 2018

Scope

GB/T 35257-2017 is the English-translated version of 纺织品 定量化学分析 壳聚糖纤维与某些其他纤维的混合物 (乙酸法).

GB/T 35257-2017 is the Chinese standard "Textiles - Quantitative chemical analysis - Mixtures of chitosan and certain other fibers(method using acetic acid)".

Its scope clause reads: This standard specifies the use of acetic acid method to determine the removal of non-fibrous material after two-component mixture of chitosan fibers and other fiber-containing The amount of method.

This standard applies to chitosan fibers and cellulose fibers (cotton, linen, ramie, hemp, viscose fiber, modal fiber, lyocell fiber Dimensional), a two-component mixture of protein fibers (wool, cashmere, silk) or synthetic fibers (polyester fibers, polyamide fibers, polyacrylonitrile fibers) Compounds; other similar fibers not given in this standard may be implemented by reference. Its clauses include principle; reagent; device; test procedures.

Found what you need?

Document preview — GB/T 35257-2017

National Standard of the People's Republic of China

ICS
59.080.01
Classification
W 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 principle
  • 4 reagent
  • 5 device
  • 6 test procedures

1 Scope

This standard specifies the use of acetic acid method to determine the removal of non-fibrous material after two-component mixture of chitosan fibers and other fiber-containing

The amount of method.

This standard applies to chitosan fibers and cellulose fibers (cotton, linen, ramie, hemp, viscose fiber, modal fiber, lyocell fiber

Dimensional), a two-component mixture of protein fibers (wool, cashmere, silk) or synthetic fibers (polyester fibers, polyamide fibers, polyacrylonitrile fibers)

Compounds; other similar fibers not given in this standard may be implemented by reference.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 2910.1 Textiles - Quantitative Chemical Analysis Part 1. General Principles of Testing

3 principle

With a certain concentration of acetic acid solution of chitosan fibers dissolved from the known quality of the mixture was removed, the residue was collected, washed, roasted

Dry and weigh; calculate the percentage of dry mass of the mixture using the corrected mass. The difference between the mass percentage of chitosan fibers.

Note. Chitosan fiber qualitative identification method can refer to Appendix A.

4 reagent

Use GB/T 2910.1 and the provisions of this standard 4.1 and 4.2 reagents.

4.1

2% (mass fraction) acetic acid solution Take 20mL glacial acetic acid (density rho = 1.049g/mL), diluted with water to 1L, and mix.

4.2

dilute ammonia solution Take 80mL concentrated ammonia (density rho = 0.880g/mL), diluted with water to 1L, and mix.

5 device

Use GB/T 2910.1 and the provisions of this standard 5.1 and 5.2 equipment.

5.1

stopper conical flask capacity of not less than 500mL.

5.2 constant temperature water bath oscillator

To maintain the temperature at 90 °C ~ 95 °C.

6 test procedures

Follow the general procedure specified in GB/T 2910.1 and follow the steps below.

6.1

Place the sample in the conical flask (5.1), add.200 mL of 2% acetic acid solution (4.1) per gram of sample, plug the glass stopper, shake vigorously, […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 35257-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35257-2017

$145.00