GB/T 35096-2018SiC particulate reinforced aluminum matrix composites－Forgings (English PDF)
SiC颗粒增强铝基复合材料 锻材
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35096-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 14, 2018
Implementation date
April 1, 2019
Scope
GB/T 35096-2018 is the English-translated version of SiC颗粒增强铝基复合材料 锻材.
GB/T 35096-2018 covers forgings made from SiC particle reinforced aluminum matrix composites by die forging or free forging. The composites are prepared by fusion casting, with SiC particles as the reinforcement at a volume fraction below 40% and aluminum alloys such as 2A14, 7A04 and 6A61 as the matrix.
The standard gives terms and definitions, a classification by matrix alloy, SiC volume fraction and heat treatment state with designations such as 10% SiC/2A14-T6, and the technical requirements, inspection methods, inspection rules, marking, packaging, transportation and storage.
It applies to forgings used in aerospace, automotive and other fields. Its test references include Brinell hardness, thermal expansion, ultrasonic and radiographic inspection, and image analysis of reinforcement content. It was issued on 14 May 2018 and has applied since 1 April 2019.
Found what you need?
Document preview — GB/T 35096-2018
National Standard of the People's Republic of China
- ICS
- 77.150.10
- Classification
- H 61
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Classification and identification
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the terms and definitions, classification and identification, technical requirements, inspection methods, and inspection of SiC particle reinforced aluminum matrix composites. Inspection rules and signs, packaging, transportation, storage.
This standard applies to SiC particle reinforced aluminum matrix composite forging materials used in aerospace, automotive and other fields.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 231.1 Brinell hardness test for metallic materials - Part 1. Test methods
Determination of thermal expansion characteristic parameters of GB/T 4339 metal materials
Ultrasonic inspection method for GB/T 6519 deformed aluminum and magnesium alloy products
Dimensional deviation and machining allowance of GB/T 8545 aluminum and aluminum alloy die forgings
Non-destructive testing - Radiographic inspection - Part 3. General rules for metallic materials X and gamma ray inspection
GB/T 31831 LED indoor lighting application technical requirements
GB/T 32496 Metal Matrix Composites - Reinforcement Volume Content Test Method Image Analysis Method
GB/T 32498 Metal Matrix Composites Tensile Test Room Temperature Test Method
YS/T 479 General industrial aluminum and aluminum alloy forgings
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 SiC particle reinforced aluminum matrix composite forging material
Various forging materials made by SiC particle reinforced aluminum matrix composites by forging process such as die forging or free forging. among them SiC particle reinforced aluminum matrix composites are prepared by fusion casting method. The reinforcement is SiC particles, and the matrix is 2A14, 7A04, 6A61 and other aluminum alloy, the volume fraction of the reinforcement is less than 40%.
4 Classification and identification
The forged product is classified according to the type of substrate selected, the volume fraction of the reinforcing SiC particles, the heat treatment state, and the like. Typical product See the example for the grade. Example:
The SiC particle reinforced aluminum matrix composite material having a volume fraction of SiC particles of 10%, a matrix of 2A14 aluminum alloy, and a heat treatment state of T6 is expressed as.
10% SiC/2A14-T6
SiC particles have a volume fraction of 10%
Aluminum matrix is 2A14 aluminum alloy
Heat treatment state is T6
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 231.1Metallic materials - Brinell hardness test - Part 1: Test method
- GB/T 4339Test methods for thermal expansion characteristic parameters of metallic materials
- GB/T 6519Ultrasonic inspection of wrought aluminium and magnesium alloy products
- GB/T 8545Aluminium alloy forgings
- GB/T 31831Technical requirements for the application of LED indoor lighting
- GB/T 32496Test method for volume fraction of reinforcement in metal matrix composites - Image analysis method
Similar standards
How to Download GB/T 35096-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 231.1-2018 — Metallic materials - Brinell hardness test - Part 1: Test method
GB/T 31831-2025 — Technical requirements for the application of LED indoor lighting
GB/T 32496-2016 — Test method for volume fraction of reinforcement in metal matrix composites - Image analysis method
Secure payment via Stripe
Payments accepted
GB/T 35096-2018
$105.00