GB/T 35083.1-2018Plain bearings -- Testing of the tribological behaviour of bearing materials -- Part 1: Testing of bearing metals (English PDF)
滑动轴承 轴承材料摩擦学特性试验 第1部分:金属轴承材料
This is a limited preview
Buy now to download the full PDF (22 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35083.1-2018 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
May 14, 2018
Implementation date
December 1, 2018
Scope
GB/T 35083.1-2018 is the English-translated version of 滑动轴承 轴承材料摩擦学特性试验 第1部分:金属轴承材料.
GB/T 35083.1-2018 — This part of GB/T 35083 specifies the tribological tests of plain bearing metal bearing materials under boundary lubrication conditions.
The purpose of the test procedure described in this section is to compare the friction and wear characteristics of various types of bearing materials/partner/lubricant combinations so that Bearing materials are selected for bearings that operate repeatedly or long-term under boundary lubrication, low speed continuous operating conditions.
Due to the different test conditions, Scuffing wear values may vary from test device to device. Only when all parameters that are influential are the same, can the test results be practical for practical applications.
Test conditions deviate from actual application The more cases there are, the higher the uncertainty of the test results.
Found what you need?
Document preview — GB/T 35083.1-2018
National Standard of the People's Republic of China
- ICS
- 21.100.10
- Classification
- J 12
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 symbols and units
Foreword
GB/T 35083 "Sliding Bearing Materials Tribological Characteristics Test" consists of the following two parts.
--- Part 1. Metal bearing material test;
--- Part 2. Testing of polymeric bearing materials.
This part is the first part of GB/T 35083.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
This section uses the translation method equivalent to the use of ISO 7148-1.2012 "sliding bearing bearing material tribology test Part 1.
Metal bearing material test".
The Chinese documents that are consistent with the normatively quoted international documents in this section are as follows.
---GB/T 16748-1997 Compression test of plain bearing metal bearing materials (idt ISO 4385.1981)
This part is proposed by China Machinery Industry Federation.
This part is under the jurisdiction of the National Sliding Bearing Standardization Technical Committee (SAC/TC236).
This section is responsible for drafting. China Machine Productivity Promotion Center, Hefei Bolin New Material Co., Ltd., Hunan Chongde Industrial Technology Co., Ltd.
Limited company.
Participated in the drafting of this section. Zhejiang Changsheng Sliding Bearing Co., Ltd., Zhejiang Shuangfei Oilless Bearing Co., Ltd., Zhejiang China
Precision Components Co., Ltd., Linan Dongfang Sliding Bearing Co., Ltd., Jiashan Fengsan Sanfu Bearing Co., Ltd.
This part is explained by the National Sliding Bearing Standardization Technical Committee.
Sliding bearing bearing material tribological characteristics test
Part 1. Metal bearing material test
1 Scope
This part of GB/T 35083 specifies the tribological tests of plain bearing metal bearing materials under boundary lubrication conditions.
The purpose of the test procedure described in this section is to compare the friction and wear characteristics of various types of bearing materials/partner/lubricant combinations so that
Bearing materials are selected for bearings that operate repeatedly or long-term under boundary lubrication, low speed continuous operating conditions. Due to the different test conditions,
Scuffing wear values may vary from test device to device.
Only when all parameters that are influential are the same, can the test results be practical for practical applications. Test conditions deviate from actual application
The more cases there are, the higher the uncertainty of the test results.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest version (including all amendments) applies to this document.
ISO 4385 Plain Bearings-Compression testing of metalic
Bearingmaterials)
3 symbols and units
See Table 1.
Table 1 Symbols and Units
Symbol definition unit
A, B, C test methods -
a sliding distance km
A5 elongation after breaking%
f friction factor; ratio of friction to positive pressure (normal pressure). f = Ff/Fn -
Ff friction force N
Fn positive pressure N
KA overlap ratio (ratio of contact area to wear track area) -
Kw
Wear factor, volumetric wear rate associated with positive pressure.
Kw=Vw/(Fnxa)=wv/Fn
Mm3/(N.km)
Lw line wear amount mm
Mw wear material weight g
Ra Surface roughness µm
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 4385
How to Download GB/T 35083.1-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 35083.2-2018 — Plain bearings -- Testing of the tribological behaviour of bearing materials -- Part 2: Testing of polymer-based bearing materials
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 35083.1-2018
$205.00