Valid

GB/T 34892-2017Non-destructive testing - Test method for robotic ultrasonic testing (English PDF)

无损检测 机械手超声检测方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34892-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 1, 2017

Implementation date

May 1, 2018

Scope

GB/T 34892-2017 is the English-translated version of 无损检测 机械手超声检测方法.

GB/T 34892-2017 is the Chinese standard "Non-destructive testing - Test method for robotic ultrasonic testing". Its scope clause reads: This standard specifies the use of robotic structures for automated ultrasonic testing methods.

This standard applies to the use of single-robot and double (multi) robot automatic ultrasonic testing, not easy for manual operation of complex shape knot Automatic ultrasonic testing of components, especially for dangerous, harmful and not suitable for manual operation of the operating environment. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 34892-2017

National Standard of the People's Republic of China

ICS
19.100
Classification
J 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 DH parameters denavit-hartenbergparameters, D-Hparameters

1 Scope

This standard specifies the use of robotic structures for automated ultrasonic testing methods.

This standard applies to the use of single-robot and double (multi) robot automatic ultrasonic testing, not easy for manual operation of complex shape knot

Automatic ultrasonic testing of components, especially for dangerous, harmful and not suitable for manual operation of the operating environment.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 9445 non-destructive testing personnel qualification and certification

GB/T 11259 nondestructive testing ultrasonic testing steel reference test piece production and control methods

GB/T 11343 Nondestructive testing Contact ultrasonic oblique detection method

GB/T 11344 nondestructive testing contact ultrasonic pulse echo thickness measurement method

GB/T 12604.1 Non-destructive testing - Ultrasonic testing

Performance specifications and test methods of industrial robots GB/T 12642

GB/T 12643 robot and robot equipment vocabulary

GB/T 18694 nondestructive testing ultrasonic testing probe and its sound field characterization

GB/T 19397 Industrial robots - Electromagnetic compatibility test methods and guidelines for performance evaluation guidelines

GB/T 20737 non-destructive testing common terms and definitions

GB/T 23905 Nondestructive testing Ultrasonic testing block

Nondestructive testing - Contact ultrasonic pulse echo direct detection method

GB/T 23912 nondestructive testing liquid immersion ultrasonic longitudinal wave pulse reflection detection method

GB/T 27664.1 Performance and testing of non-destructive testing ultrasonic testing equipment - Part 1. Instruments

GB/T 27664.2 Performance and testing of non-destructive testing ultrasonic testing equipment - Part 2. Probe

3 Terms and definitions

GB/T 12604.1, GB/T 12643, GB/T 20737 and defined by the following terms and definitions apply to this document.

3.1 DH parameters denavit-hartenbergparameters, D-Hparameters

The four link parameters (link offset di, joint angle thetai, link length ai and turn angle alphai) describing the kinematic relationship of the articulated robot mechanism,

As shown in Figure 1. Which link angle alphai and link length ai two parameters used to describe the link itself, the joint angle thetai and link offset di two

The parameters are used to describe the connection between the connecting rod. Link length ai said connecting rod i joint axis at both ends of the common vertical length; connecting rod

The angle alphai is used to define the relative position of the two joint axes. The link offset di describes the distance along the common axis of two adjacent links. The joint angle thetai

The angle at which two adjacent links rotate about a common axis.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 34892-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34892-2017

$240.00