GB/T 34886-2017Non-destructive testing—Test method for laser shearography of composite materials (English PDF)
无损检测 复合材料激光错位散斑检测方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34886-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 1, 2017
Implementation date
May 1, 2018
Scope
GB/T 34886-2017 is the English-translated version of 无损检测 复合材料激光错位散斑检测方法.
GB/T 34886-2017 is the Chinese standard "Non-destructive testing—Test method for laser shearography of composite materials". Its scope clause reads: This standard specifies the method of laser dislocation speckle detection of composite materials.
This standard applies to testing composite laminates, cellular sandwich adhesive components, foam sandwich adhesive components, detectable defect type package Including debonding, delamination, impact damage and so on.
Other materials, adhesive defects testing, can refer to use. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 34886-2017
National Standard of the People's Republic of China
- ICS
- 19.100
- Classification
- J 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Displacement
- 3.2 Displacement shearvector
- 3.3 Specklegram of speckle
- 3.4 Interference fringe pattern
- 3.5 Phase map phasemapshearogram
1 Scope
This standard specifies the method of laser dislocation speckle detection of composite materials.
This standard applies to testing composite laminates, cellular sandwich adhesive components, foam sandwich adhesive components, detectable defect type package
Including debonding, delamination, impact damage and so on. Other materials, adhesive defects testing, can refer to use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB 7247.1 Safety of laser products - Part 1. Equipment classification, requirements
GB/T 9445 non-destructive testing personnel qualification and certification
GB/T 20737 non-destructive testing common terms and definitions
3 Terms and definitions
GB/T 20737 defined and the following terms and definitions apply to this document.
3.1 Displacement
The displacement component perpendicular to the surface of the object (normal direction). The parameters directly measured by laser misalignment speckle technique are essentially the out-of-plane of the object
Displacement.
3.2 Displacement shearvector
Shear amount
The optical imaging device of the laser misalignment speckle detection system superimposes two misalignment images of an object, the distance between two images and the phase
The direction, see Figure 1.
3.3 Specklegram of speckle
The laser-irradiated speckled image on the surface of the object due to diffuse reflection is shown in Figure 2a). Randomly distributed spots along with objects
Body surface deformation synchronous movement, a surface displacement information carrier.
3.4 Interference fringe pattern
Before and after deformation of two speckle figures subtracted to get the black and white striped image, shown in Figure 2b), the stripe contains the surface of the object
Displacement information.
3.5 Phase map phasemapshearogram
The corresponding point optical interference optical phase obtained through the operation of multiple speckle patterns obtained by the phase shift device in the laser dislocation speckle system […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34886-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34886-2017
$210.00