Valid

GB/T 34857-2017Bath agents and shower agents (English PDF)

沐浴剂

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34857-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 1, 2017

Implementation date

May 1, 2018

Scope

GB/T 34857-2017 is the English-translated version of 沐浴剂.

GB/T 34857-2017 is the Chinese standard "Bath agents and shower agents". Its scope clause reads: This standard specifies the product classification and labeling, requirements, test methods, inspection rules, marking, packaging, transportation and storage of bath agents and shower agents.

This standard is applicable to products prepared by using surfactant as an active ingredient for human skin cleansing, which presents in the form of liquid, paste and solid (except soap).

Its clauses include product classification and labeling; requirements; test methods.

Found what you need?

Document preview — GB/T 34857-2017

National Standard of the People's Republic of China

ICS
71.100.40
Classification
Y 43

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword i
  • 1 Scope
  • 2 Normative references
  • 3 Product classification and labeling
  • 4 Requirements
  • 5 Test methods
  • 6 Inspection rules
  • 7 Marking, packaging, transportation and storage

1 Scope

This standard specifies the product classification and labeling, requirements, test methods, inspection rules, marking, packaging, transportation and storage of bath agents and shower agents.

This standard is applicable to products prepared by using surfactant as an active ingredient for human skin cleansing, which presents in the form of liquid, paste and solid (except soap).

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For the undated references, the latest editions of the normative documents (including all the amendments) are applicable to this document.

GB/T 6682 Water for analytical laboratory use - specification and test methods

GB/T 13173-2008 Surface active agents - detergents - testing methods

GB/T 26396 Technical specification for safety of soaps and detergents

QB/T 2951 Inspecting rules for detergent products

QB/T 2952 Requirements for detergent marks and packaging

Safety and Technical Standards for Cosmetics (Edition 2015) the China Food and Drug Administration

3 Product classification and labeling

3.1 Product classification

According to use object, the product is classified into adult (ordinary, concentrated) type and children (ordinary, concentrated) type.

3.2 Product labeling

See Table 1 for product labeling method.

Table 1 Product Labeling Method

Product type Adult Children

Ordinary type Concentrated type Ordinary type Concentrated type

Labeling method GB/T 34857-2017 GB/T 34857-2017 (concentrated type) GB/T 34857-2017 (children type) GB/T 34857-2017 (concentrated children type)

Note: the standard year number may be omitted in the label. Those not marked with year number are required to implement the current effective standards; the product markings implemented according to other standards are labeled according to the standards implemented. Products that are described as possessing concentration characteristics in the name or directions for use are concentrated type (such as being described by concentrated, highly-concentrated, enriched, etc.), otherwise they are ordinary type.

4 Requirements

4.1 Raw material requirements

The adopted raw material shall meet the relevant requirements for Class B products in GB/T 26396.

4.2 Sensory and physical & chemical indexes

The sensory and physical & chemical indexes of products shall be in accordance with those specified in Table 2.

Table 2 Sensory and Physical & Chemical Indexes

Item Adult Children

Ordinary type Concentrated type Ordinary type Concentrated type

Sensory indexes Appearance Liquid or paste products are not delaminated, without significant suspension (except for products with uniform suspended particle components) or precipitation; block products are uniform in color, smooth and fine, without obvious mechanical impurities and stains

Odor No peculiar smell

Physical & chemical indexes Stabilitya Heat resistance: (40±2)°C, 24h After recovering to room temperature, it's found through observation that there is no delamination, precipitation, peculiar smell and discoloration, and transparent products are not turbid

Cold resistance: (-5±2)°C, 24h After recovering to room temperature, it's found through observation that there is no delamination, precipitation and discoloration, and transparent products are not turbid

Total effective matter (%) >= 7 14 5 10 pHb(25°C) 4.0~10.0 4.0~8.5

Formaldehyde/(mg/kg) <= 500 a Only liquid or paste products need to be subject to stability test, and the product is required to recover to room temperature without significant changes compared with the one before test.

b pH test concentration: liquid or paste product 1:10 (mass ratio), solid product 1:20 (mass ratio).

4.3 Hygienic requirements

The limit requirements for microbiological indexes of products (total number of colonies, total mold and yeast, heat-resistant coliform, staphylococcus aureus and pseudomonas aeruginosa), harmful substances (hydrargyrum, lead, arsenic, cadmium, methanol and dioxane) shall be in accordance with Safety and Technical Standards for Cosmetics (Edition 2015).

5 Test methods

Unless otherwise specified, only reagents recognized analytically pure and Class-III water or above specified in GB/T 6682 are used for the analysis.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 34857-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34857-2017

$65.00