Valid

GB/T 34837-2017Classification, terminology and numbering for parts and assemblies of time measuring instruments - Quartz wristwatch movements (English PDF)

计时仪器零部件分类、名称和编号 石英手表机心

Preview PDF

This is a limited preview

Buy now to download the full PDF (23 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34837-2017 in 30 minutes.

Issued by

AQSIQ; SAC

Level / Type

National · Recommended

Issue date

November 1, 2017

Implementation date

May 1, 2018

Scope

GB/T 34837-2017 is the English-translated version of 计时仪器零部件分类、名称和编号 石英手表机心.

China's national standard for classifying, naming and numbering the parts and assemblies of a quartz wristwatch movement.

A watch movement contains upward of a hundred parts, most of them smaller than a grain of rice, and the industry that makes them is fragmented: movements from one maker are cased by another and serviced by a third, anywhere in the world, decades later.

A watchmaker ordering a replacement part needs to name it unambiguously, and the names are not obvious - the same component has traditional French, Swiss German and English names that do not map cleanly onto one another.

A numbering system solves what naming cannot. China is by a wide margin the largest producer of watch movements by volume, so having a national classification that lines up with the international conventions is what allows its output to be serviced through the same channels as everyone else's.

The standard covers the quartz movement specifically, whose part set differs substantially from a mechanical one.

Found what you need?

Document preview — GB/T 34837-2017

National Standard of the People's Republic of China

ICS
39.040.10
Classification
Y 11

Issued by: General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the PRC

Contents

  • ForewordIII
  • 1 Scope1
  • 2 Classification, name and number1
  • 2.1 Pointer quartz watch movement1
  • 2.1.1 Power Components1
  • 2.1.2 Circuit board components2
  • 2.1.3 Stepper motor2
  • 2.1.4 Transmission3
  • 2.1.5 Dial mechanism3
  • 2.1.6 Splint class4
  • 2.1.7 Common parts name and number5
  • 2.1.8 Additional institutions5
  • 2.1.9 Movement assembly diagram8
  • 2.2 Quartz crystal watch movement8
  • 2.2.1 Power Components8
  • 2.2.2 Circuit board assembly9
  • 2.2.3 Conductive connector9
  • 2.2.4 Display device9
  • 2.2.5 Adjustment button9
  • 2.2.6 Plastic holder10
  • 2.2.7 Screws10
  • 2.2.8 Additional Facilities10
  • 2.2.9 Movement assembly diagram11
  • Appendix A (Normative) Amethyst Quartz Watch Movement Parts Name and Number12
  • Appendix B (informative) pointer quartz watch movement assembly diagram15
  • Appendix C (informative) LCD quartz watch movement assembly diagram20

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard proposed by the China Light Industry Federation.

This standard by the National Clock Standardization Technical Committee (SAC/TC160) centralized.

This standard was drafted unit. Light Industry Institute of watches and clocks, Fujian Run Precision Instrument Co., Ltd., King Electronics (Shenzhen) Co., Ltd., Zhuhai

Rossini Table Co., Ltd., Zhangzhou Hengli Electronics Co., Ltd., Shenzhen Titan watches Technology Co., Ltd., Shenzhen Fiyta Technology

Development Co., Ltd., Zhejiang Zhuoyue Electronics Co., Ltd., Fuzhou small dragon watch industry R & D Co., Ltd., Qingdao Zi Xin Industrial Co., Ltd., Fu

Build Ruida Seiko Co., Ltd.

The main drafters of this standard. Kim Young-shu, Su Fang, Xi Fai, Fan Yaorong, Lianfeng, Li Yuzhong, Zhang Kelai, Wang Yongning, Guo Xingang,

Shao Yue Ming, Lan Liping, Wang Yanmin, He Guangxian, Zhang Yun, Liu Yingcai, Wang Jian, Su Yanming, Luan Shaoqing, Li Xia, Jiang Wei, Chen Bin.

Timing instrument parts classification, name and number

Quartz watch movement

1 Scope

This standard specifies the classification of quartz watch movement parts, name and number.

This standard applies to different structures and functions of quartz watch movement.

2 classification, name and number

2.1 pointer quartz watch movement

Remaining clauses in the full document

  • 2 Classification, name and number

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 23 pages — is available in the English PDF.

How to Download GB/T 34837-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
23 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34837-2017

$310.00