GB/T 34637-2017Non-destructive testing—Test methods for bubble leak detection (English PDF)
无损检测 气泡泄漏检测方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34637-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 29, 2017
Implementation date
April 1, 2018
Scope
GB/T 34637-2017 is the English-translated version of 无损检测 气泡泄漏检测方法.
GB/T 34637-2017 is the Chinese standard "Non-destructive testing—Test methods for bubble leak detection". Its scope clause reads: This standard specifies the bubble leak detection method and the results of evaluation.
This standard applies to the system and in the use of closed equipment or parts of the bubble leak detection. Its clauses include terms and definitions; method summary; safety requirements.
Found what you need?
Document preview — GB/T 34637-2017
National Standard of the People's Republic of China
- ICS
- 19.100
- Classification
- J 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Method summary
- 5 safety requirements
1 Scope
This standard specifies the bubble leak detection method and the results of evaluation.
This standard applies to the system and in the use of closed equipment or parts of the bubble leak detection.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 9445 non-destructive testing personnel qualification and certification
GB/T 11533 standard logarithmic visual acuity chart
GB/T 12604.7 Non-destructive testing term leak detection
GB/T 20737 non-destructive testing common terms and definitions
GB/T 20967 non-destructive testing visual inspection General
3 Terms and definitions
GB/T 12604.7 and GB/T 20737 defined terms and definitions apply to this document.
4 Method summary
Bubble leak detection technology, is the use of the pressure difference generated on both sides of the test object, the bubble in the low pressure side of the solution to detect the vent
Leakage method, with easy, fast, environmentally friendly and low-cost features. The sensitivity of the bubble leak detection method is affected by pressure difference, pressurized gas
And foaming solution. Bubble leak detection methods include the following two techniques.
a) direct pressurization technology, the inside of the equipment to be inspected is directly pressurized with gas, and a foaming solution is directly applied to the outside of the equipment or the equipment to be inspected
Directly immersed in the solution of the detection method, according to the formation of gas leakage bubbles through the liquid to determine whether the seized equipment leaks and leaks
The location of the hole b) Vacuum cover technology, suitable for the detection of leakage can not be directly pressurized equipment leak detection method. In the seized equipment shell local area facilities
Plus bubble solution, and then through the vacuum hood so that the two sides of this local area to form a certain pressure difference, if leakage occurs, will be in
Bubbles are generated on the low pressure side to determine the site of the leak.
5 safety requirements
Users using this standard should establish safety guidelines before testing. Safety guidelines should include at least.
a) The inspectors shall comply with the safety requirements of the test site, wear protective overalls and wear protective clothing according to the requirements of the test site equipment;
b) When operating at high altitude, the necessary protective measures should be taken into consideration when considering the factors such as the fall of personnel and equipment and equipment;
c) Under extreme conditions such as low temperature and high temperature, the personnel should consider frostbite, scald, heat stroke and other factors and take the necessary protection […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34637-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34637-2017
$145.00