GB/T 34585-2017Battery electric goods vehicles - Specifications (English PDF)

纯电动货车技术条件

Open the GB/T 34585-2017 preview as PDF

Preview — first pages of GB/T 34585-2017 (full document: 11 pages)

This is a limited preview

Buy now to download the full PDF (11 pages)

Issued by

AQSIQ; SAC

Level / Type

National · Recommended

Issue date

October 14, 2017

Implementation date

July 1, 2018

Scope

GB/T 34585-2017 is the English-translated version of 纯电动货车技术条件.

China's national specification for battery electric goods vehicles. It specifies the terms and definitions, the requirements and the test methods for electric vehicles built to carry goods. Electric propulsion arrived in goods vehicles from the bottom of the range upward, and for reasons of duty cycle rather than sentiment. A delivery van running a fixed urban round covers a predictable distance, returns to the same depot every night, spends much of its day stopped or in traffic where an engine is at its worst, and operates exactly where air quality regulation bites hardest. Every one of those characteristics favours a battery. The specification has to address what is different about a goods vehicle as opposed to a car: payload matters, and the battery competes directly with it; the vehicle is loaded and unloaded repeatedly, so range varies with the day's work; and the operator will judge it against a diesel on total cost per kilometre rather than on list price. The requirements and test methods here are what make those comparisons possible.

Document preview — GB/T 34585-2017

National Standard of the People's Republic of China

ICS: 43.080.01
Classification: T47

Issued by: General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the PRC

Foreword ..........................................................................................................3
1 Scope .........................................................................................................4
2 Normative references .................................................................................4
3 Terms and definitions .................................................................................4
4 Requirements and test methods.................................................................7

Foreword

NATIONAL STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA ICS

Battery electric goods vehicles - Specifications

Battery electric goods vehicles - Specifications 1 Scope

This Standard specifies the terms and definitions, requirements, and test methods of battery electric goods vehicles. This Standard is applicable to battery electric goods vehicles (hereafter known as "vehicles" for short).

2 Normative references

The following documents are indispensable for the application of this document. For the dated references, only the versions with the dates indicated are applicable to this document. For the undated references, the latest version (including all the amendments) are applicable to this document.

GB 1589 Limits of Dimensions, Axle Load and Masses for Motor Vehicles, Trailers and Combination Vehicles

GB 7258 Safety specifications for power-driven vehicles operating on roads

GB/T 18384 (all parts) Electrically propelled road vehicles - Safety specifications

GB/T 18385 Electric vehicles - Power performance - Test method.

GB/T 18386 Electric vehicles - Energy consumption and range - Test procedures

GB/T 19596 Terminology of electric vehicles

GB/T 20234 (all parts) Connection set for conductive charging of electric vehicles

GB/T 27930 Communication protocols between off-board conductive charger and battery management system for electric vehicle

GB/T 31498 The safety requirement of electric vehicle post crash

3 Terms and definitions

7 In accordance with the test method prescribed by GB/T 18385, the maximum gradeability of the vehicle is measured. It shall not be less than 20%.

4.5.2 Range Class N1 vehicles, according to the mode-test (including suburban mode) of GB/T 18386, shall be tested; the range shall not be lower than 80 km. Other types of vehicles, by the isokinetic method of GB/T 18386, shall be tested; the range shall not be lower than 120 km. 4.5.3 30 min maximum speed The vehicle, in accordance with the test method specified in GB/T 18385, shall measure the 30 min maximum speed. Its value shall not be less than 70 km/h.

4.6 Power storage battery The power battery shall meet the following requirements: - The vehicle's power storage battery shall not use lead-acid battery; - The cycle life, safety, and electrical performance shall conform to the requirements of relevant national regulations.

4 Requirements and test methods.................................................................

4.7 Reliability requirements

4.7.1 Mileage distribution The total mileage of reliability driving test is 15000 km, including 5000 km of intensified bad roads, 5000 km of flat roads, and 5000 km of high-speed roads. The road performance test mileage before reliability driving test, and mileage of each test room can be included in reliability test mileage.

--- The End - - -

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 11 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 18384 · GB/T 18385 · GB/T 18386 · GB/T 20234

Cited by

GB/T 34598-2025Plug-in hybrid electric commercial vehicles — Technical specifications

How to Buy GB/T 34585-2017

1Add to cart. Click the "Buy GB/T 34585-2017" button on this page. You can add more standards before checkout.
2Checkout. Enter your email and billing details. Payment is processed securely by Stripe (cards, Apple Pay, Google Pay supported).
3Instant delivery (0–9 sec). Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4Invoice included. A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.