Valid

GB/T 34567-2017Cold-formed corrugated steel pipes (English PDF)

冷弯波纹钢管

Preview PDF

This is a limited preview

Buy now to download the full PDF (37 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34567-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 14, 2017

Implementation date

July 1, 2018

Scope

GB/T 34567-2017 is the English-translated version of 冷弯波纹钢管.

GB/T 34567-2017 is the Chinese standard "Cold-formed corrugated steel pipes".

Its scope clause reads: This standard specifies the terms cold rolled corrugated steel pipe and cold-formed corrugated steel, the definition and symbols, materials, classification, type, connection and Said methods, specifications and size tolerances, technical requirements, test methods, inspection rules, signs, certificates of quality and transport.

This standard applies to municipal pipe network (urban integrated pipe gallery, sponge city, etc.), bridges and culverts, tunnels, tower foundation piles, water conservancy facilities, warehousing, military Cold-corrugated corrugated steel pipe (hereinafter referred to as "corrugated steel pipe") and cold-corrugated corrugated steel plate (hereinafter referred to as "corrugated steel plate") for facilities and facilities. other Cold-formed corrugated steel pipe and cold-formed corrugated steel plate used in the project may refer to the use. Its clauses include terms, definitions and symbols.

Found what you need?

Document preview — GB/T 34567-2017

National Standard of the People's Republic of China

ICS: 77.140.70
Classification: H 44

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 material
5 classification, model, connection and representation
6 specifications and size tolerances
7 Technical Requirements
8 Test Methods
10 logos, quality certificates and shipping
Appendix A (Normative) Corrugated steel pipe used in the bolt type
Appendix B (Normative) Corrugated pipe special gasket type
Appendix C (Normative) Corrugated section and cross-sectional characteristics of parameters
Appendix D (Normative) Spiral corrugated steel pipe size size
Appendix E (Normative) Spiral corrugated steel pipe arch size
Appendix F (Normative) Ring corrugated steel pipe size size
Appendix G (Normative) Prestressed corrugated pipe assembly size
Appendix H (Normative) Wave corrugated steel pipe assembly size 31 specifications
Appendix I (Normative) Deep wave assembled corrugated pipe size
Appendix J (Normative) Wave assembled corrugated steel pipe size
Appendix K (Normative) Helical corrugated steel pipe bite occlusal force test method

1 Scope

This standard specifies the terms cold rolled corrugated steel pipe and cold-formed corrugated steel, the definition and symbols, materials, classification, type, connection and

Said methods, specifications and size tolerances, technical requirements, test methods, inspection rules, signs, certificates of quality and transport.

Cold-corrugated corrugated steel pipe (hereinafter referred to as "corrugated steel pipe") and cold-corrugated corrugated steel plate (hereinafter referred to as "corrugated steel plate") for facilities and facilities. other

Cold-formed corrugated steel pipe and cold-formed corrugated steel plate used in the project may refer to the use.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 228.1 tensile testing of metallic materials - Part 1. room temperature test method

GB/T 470-2008 zinc ingots

GB/T 700 carbon structural steel

GB/T 706 hot-rolled steel

GB/T 709 hot-rolled steel sheet and strip size, shape, weight and tolerances

GB/T 1231 high strength steel hexagonal head bolts, large hexagonal nuts, gaskets technical conditions

GB/T 1591 low-alloy high-strength structural steel

GB/T 2101 steel acceptance, packaging, marking and quality certificate of the general provisions

GB/T 2518 continuous hot dip galvanized steel sheet and strip

GB/T 2975 steel and steel products mechanical properties test sampling location and sample preparation

GB/T 4171 weathering structural steel

GB/T 12467.1 quality requirements for welding of metallic materials - Part 1. Quality Selection criteria for the appropriate level

JB/T 3223 Welding Materials Quality Management Procedures

JT/T 281-2015 Highway wave beam steel guardrail

3 Terms, definitions and symbols

3.1 Terms and definitions

The following terms and definitions apply to this document.

3.1.1 Spiral corrugated steel pipe

Steel strip by the wave and spiral lock bite made of steel with a complete cross-section.

3.1.2 Helical outer corrugated steel pipe spiral

Steel formed by the rolling wave processing is the outer corrugated, no obvious corrugated spiral corrugated pipe wall.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 37 pages — is available in the English PDF.

Similar standards

GB/T 47634-2026|GB/T 47885-2026|GB/T 47996-2026|GB/T 706-2026|GB/T 8602-2026|GB/T 11264-2025

How to Download GB/T 34567-2017

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.