GB/T 34532-2017Coking wastewater—Determination of ammonia nitrogen content—Formaldehyde method (English PDF)
焦化废水 氨氮含量的测定 甲醛法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34532-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 14, 2017
Implementation date
May 1, 2018
Scope
GB/T 34532-2017 is the English-translated version of 焦化废水 氨氮含量的测定 甲醛法.
GB/T 34532-2017 is the Chinese standard "Coking wastewater—Determination of ammonia nitrogen content—Formaldehyde method". Its scope clause reads: This standard specifies the method of determination of ammonia nitrogen content.
This standard applies to the determination of ammonia nitrogen content in coking wastewater. Measurement range (mass concentration). 10.0 mg/L to 3500.0 mg/L. Its clauses include principle; reagents and materials.
Found what you need?
Document preview — GB/T 34532-2017
National Standard of the People's Republic of China
- ICS
- 71.080
- Classification
- G 15
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 principle
- 4 reagents and materials
1 Scope
This standard specifies the method of determination of ammonia nitrogen content.
This standard applies to the determination of ammonia nitrogen content in coking wastewater. Measurement range (mass concentration). 10.0 mg/L to 3500.0 mg/L.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Preparation of chemical reagent standard titration solution GB/T 601-2002
GB/T 6682 analytical laboratory water specifications and test methods
GB/T 12808 laboratory glassware single standard pipette
Water quality - Determination of ammonia - Distillation - Neutralization titration method
3 principle
In neutral solutions, ammonium salts react with formaldehyde to form hexamethylenetetramine and an acid equivalent to the ammonium salt content, with hydrogen in the presence of an indicator
Sodium oxide standard solution titration.
6HCHO 2 (NH 4) 2 SO 4 = (CH 2) 6 N 4 2H 2 SO 4 6H 2 O
H2SO4 2NaOH = Na2SO4 2H2O
4 reagents and materials
In the analysis process, only use approved analytical reagent and meet the GB/T 6682 provisions of more than three distilled water or its purity equivalent
Water.
4.1 sulfuric acid solution (1%)
Take 5.6mL sulfuric acid (density 1.84g/mL), slowly poured into about 700mL water, cooled, diluted with water
To 1000 mL.
4.2
Sodium hydroxide solution (20 g/L) 20 g of sodium hydroxide are dissolved in 100 mL of carbon dioxide-free water, cooled and treated with carbon dioxide free
Water diluted to 1000mL.
4.3 Neutral formaldehyde solution (25%)
Take 676mL formaldehyde (content 37.0% ~ 40.0%), in 1000mL volumetric flask, diluted with water
To the mark, before use phenolphthalein indicator solution (see 4.6) as an indicator, with sodium hydroxide standard solution (see 4.4) and neutral to neutral.
4.4
sodium hydroxide standard titration solution .c (NaOH) = 0.1mol/L (prepared according to GB/T 601-2002 in 4.1).
4.5
Methyl red indicator solution (1 g/L) 0.1 g methyl red is dissolved in a small amount of ethanol (95%) and diluted to 100 mL with ethanol (95%).
4.6
Phenolphthalein indicator solution (10 g/L) 1 g of phenolphthalein was dissolved in a small amount of ethanol (95%) and diluted to 100 mL with ethanol (95%).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34532-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34532-2017
$85.00