GB/T 34489-2017Aluminium alloys extruded profiles and sheets for roofing structure (English PDF)
屋面结构用铝合金挤压型材和板材
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34489-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 14, 2017
Implementation date
May 1, 2018
Scope
GB/T 34489-2017 is the English-translated version of 屋面结构用铝合金挤压型材和板材.
GB/T 34489-2017 is the Chinese standard "Aluminium alloys extruded profiles and sheets for roofing structure".
Its scope clause reads: This standard specifies the roof structure with aluminum extrusion profiles and sheet requirements, test methods, inspection rules and signs, packaging, transportation, Storage and quality certificate and purchase order (or contract) content.
This standard applies to metal roofing structure with aluminum extrusion (hereinafter referred to as profiles) and extruded sheet (hereinafter referred to as plate). Its clauses include requirements.
Found what you need?
Document preview — GB/T 34489-2017
National Standard of the People's Republic of China
- ICS
- 77.150.10
- Classification
- H 61
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 requirements
- 3.1 product classification
1 Scope
This standard specifies the roof structure with aluminum extrusion profiles and sheet requirements, test methods, inspection rules and signs, packaging, transportation,
Storage and quality certificate and purchase order (or contract) content.
This standard applies to metal roofing structure with aluminum extrusion (hereinafter referred to as profiles) and extruded sheet (hereinafter referred to as plate).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2039 metal materials uniaxial tensile creep test method
GB/T 3075 fatigue test of metallic materials - Axial force control method
GB/T 3190 Deformed aluminum and aluminum alloy chemical composition
GB/T 3199 aluminum and aluminum alloy products packaging, marking, transportation and storage
GB/T 3246.1 Deformed aluminum and aluminum alloy products - Part 1. Microstructure inspection methods
GB/T 3246.2 Transformed aluminum and aluminum alloy products - Test methods - Part 2. Low magnification test methods
GB/T 5237.1 aluminum alloy building profiles - Part 1. Substrates
Aluminum alloy building profiles - Part 3. Electrophoretic paint profiles
GB/T 5237.4 aluminum alloy building profiles - Part 4. Dusting profiles
GB/T 5237.5 aluminum alloy building profiles - Part 5. Spray profiles
GB/T 7999 aluminum and aluminum alloy direct reading emission spectrometry
GB/T 8170 rounded repair rules and limit values of the representation and judgment
GB/T 16865 deformed aluminum, magnesium and its alloys processed products tensile test specimens and methods
GB/T 17432 Deformed aluminum and aluminum alloy chemical composition sampling method
GB/T 20975 (All parts) - Aluminum and aluminum alloys - Methods of chemical analysis
GB/T 34487 structural aluminum alloy products with shear test methods
Code for design of aluminum alloy structure
YS/T 67 deformed aluminum and aluminum alloy ingot
YS/T 439 aluminum and aluminum alloy extruded flat bar and board
YS/T 773 solar cell frame with aluminum profiles
3 requirements
3.1 product classification
3.1.1 structure type and grade, status
The products are classified into main load-bearing structural products and other structural products according to the purposes of use. For typical examples of their cross-sections, see Appendix A, their grades, shapes
State, structure type should be consistent with the provisions of Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34489-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34489-2017
$295.00