GB/T 34483-2017beta transus temperature determination methods of zirconium and zirconium alloys (English PDF)
锆及锆合金β相转变温度测定方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34483-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 14, 2017
Implementation date
May 1, 2018
Scope
GB/T 34483-2017 is the English-translated version of 锆及锆合金β相转变温度测定方法.
GB/T 34483-2017 is the Chinese standard "beta transus temperature determination methods of zirconium and zirconium alloys". Its scope clause reads: This standard specifies the metallographic method for determination of zirconium and zirconium alloy beta-phase transition temperature of the method and determine the conditions.
This standard applies to the determination of zirconium and zirconium alloy Talpha/alpha beta and T beta transition temperature. Its clauses include terms and definitions; principle; sampling requirements.
Found what you need?
Document preview — GB/T 34483-2017
National Standard of the People's Republic of China
- ICS
- 77.040.99
- Classification
- H 14
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 principle
- 5 sampling requirements
1 Scope
This standard specifies the metallographic method for determination of zirconium and zirconium alloy beta-phase transition temperature of the method and determine the conditions.
This standard applies to the determination of zirconium and zirconium alloy Talpha/alpha beta and T beta transition temperature.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Determination of effective heating zone for heat treatment furnaces GB/T 9452-2012
GB/T 13298 metal microstructure test method
GB/T 15749 quantitative metallographic determination
GB/T 18876.1 Application of automatic image analysis of steel and other metals in the microstructure, inclusions content and level of the standard test
Methods - Part 1. Image analysis and stereology of inclusions or secondary phases in steel and other metals
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Lower beta phase transition temperature
alpha to alpha beta phase transition temperature of zirconium and zirconium alloys in the heating process began to appear when the corresponding beta-phase temperature, with Talpha/alpha beta said.
3.2 Upper beta phase transition temperature
alpha beta to beta phase transition temperature Zirconium and zirconium alloys in the heating process is completely converted to the minimum temperature beta phase, with T beta said.
4 principle
Zirconium and zirconium alloys with the heating temperature will occur allotrope transformation, the first phase from alpha to alpha beta phase, at a higher temperature End
All into the beta phase. The method is to determine Talpha/alphabeta and Tbeta by observing the microstructure of the sample at the quenching temperature.
5 sampling requirements
5.1 Sampling location and requirements
5.1.1
ingot melting furnace number should be Talpha/alpha beta and T beta transition temperature determination. Samples can be taken from extrusion billets, bar billets, forgings and slabs
Intermediate blanks and plates, rods, tubes and other processed products.
5.1.2
The original structure of the sample blank should be as uniform as possible.
5.2 Sample
5.2.1
Cut the sample, the cooling method should be used to ensure that the sample does not produce deformation and overheating. The sample should be a more regular diameter […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34483-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34483-2017
$205.00