GB/T 34386-2017Web-fed print quality inspection system (English PDF)
卷筒料印刷品质量检测系统
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34386-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 14, 2017
Implementation date
May 1, 2018
Scope
GB/T 34386-2017 is the English-translated version of 卷筒料印刷品质量检测系统.
GB/T 34386-2017 is the Chinese standard "Web-fed print quality inspection system".
Its scope clause reads: This standard specifies the roll material quality inspection system (hereinafter referred to as the detection system) terms and definitions, types and basic parameters, to Seeking, testing methods, inspection rules and signs, packaging, transportation and storage.
This standard applies to the web material quality defects online inspection or off-line detection of automated visual inspection system. This standard Does not apply to the quality of fabrics and other web defects detection, quality defects detection can refer to this standard. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 34386-2017
National Standard of the People's Republic of China
- ICS
- 37.100.10
- Classification
- J 87
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 type and basic parameters
- 4.1 Composition
- 4.2 type
- 4.3 Basic parameters
- 4.4 Model and Name
- 5 Requirements
- 5.1 Assembly accuracy
- 5.2 roll material delivery requirements
- 5.3 imaging capabilities
- 5.4 Detection Performance
- 5.5 Software Features
- 5.6 defect handling function
- 5.7 Security
- 5.8 Electrical Quality
- 5.9 appearance quality
- 5.10 operating instructions and product certification
- 6 test method
- 6.1 assembly accuracy test
- 6.2 roll material inspection
- 6.3 test performance test
- 6.4 software function test
- 6.5 defect handling function test
- 6.6 Security Inspection
- 6.7 Electrical Quality Testing
- 6.8 Appearance Quality Inspection
- 7 Inspection rules
- 7.1 factory inspection
- 7.2 type test
- 8 logo, packaging, transportation and storage
- 8.1 mark
- 8.2 Packaging
- 8.3 Transport
- 8.4 Storage
- Appendix A (Normative) Standard inspection Figure
- Appendix B (Normative) Imaging uniformity test method
- Appendix C (Normative) Imaging gray scale range and linearity test methods
- References
1 Scope
This standard specifies the roll material quality inspection system (hereinafter referred to as the detection system) terms and definitions, types and basic parameters, to
Seeking, testing methods, inspection rules and signs, packaging, transportation and storage.
This standard applies to the web material quality defects online inspection or off-line detection of automated visual inspection system. This standard
Does not apply to the quality of fabrics and other web defects detection, quality defects detection can refer to this standard.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB 2894 safety signs and guidelines for their use
GB/T 4879 rust-proof packaging
GB/T 5048 moisture-proof packaging
Mechanical and electrical safety - Mechanical electrical equipment - Part 1. General specifications
GB/T 6388 transport packaging shipping symbols
GB/T 9969 Industrial Products Manual General
GB/T 13306 signs
GB/T 13384 mechanical and electrical product packaging General technical conditions
GB/T 14258 Information Technology Automatic Identification and Data Acquisition Bar code symbol printing quality inspection
GB/T 14436 Industrial product assurance documents General
GB/T 18284 fast response matrix code
GB/T 19437 Printing technology printed images of the spectral measurement and colorimetric calculation
GB/T 28387.1-2012 Printing machinery and paper-making machinery design and structural safety rules - Part 1. General requirements
CY/T 3 color evaluation lighting and observation conditions
JB/T 3090 printing machinery product name and model preparation methods
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Visual inspection system
Can be measured on the appearance of the image acquisition and processing, and appearance defects to identify, judge, classification and analysis of automatic detection
Device.
3.2 Online testing
In the production line of print quality defects in real-time testing.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 34386-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 34386-2017
$355.00