GB/T 34362-2017Non-destructive testing—Guide for eddy current testing using conformable sensor arrays (English PDF)
无损检测 适形阵列涡流检测导则
This is a limited preview
Buy now to download the full PDF (18 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34362-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 29, 2017
Implementation date
April 1, 2018
Scope
GB/T 34362-2017 is the English-translated version of 无损检测 适形阵列涡流检测导则.
GB/T 34362-2017 is the Chinese national standard covering non-destructive testing, Guide for eddy current testing using conformable sensor arrays. It was issued on 29 September 2017 and has been in force since 1 April 2018, as a first edition.
The document is under the responsibility of the Standardization Administration of China. This page is published from the official record of the 2017 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — GB/T 34362-2017
National Standard of the People's Republic of China
- ICS
- 19.100
- Classification
- J 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Procedures for Qualification and Use of Measuring Systems
- 4.1 Test set-up
- 4.2 Time domain response
- 4.3 Frequency response
- 4.4 Free-field parameters
- 4.5 Echo sound measurement
- 4.6 Impedance
- 4.7 Relative sensitivity
- 5 Tests and Test Requirements for an Approved Measuring System and Its Components
- 5.1 Personnel
- 5.2 Description of the method
- 5.3 Process sequence
- 5.4 Equipment
- 6 Measurement of Direct Voltage
- 6.1 General Principles 2
- 6.2 Elimination rate
- 6.3 Confirmation of Pollutant Accumulation 3
- 6.4 Micro bubble elimination evaluation steps
- 7 Measurement of Alternating Voltage
- 7.1 Report of test conditions 3
- 7.2 Reporting of test results
- 8 Measurement of Lightning Impulse Voltage
- 9 Measurement of Switching Impulse Voltage
1 Foreword
GB/T 34362-2017 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 29 September 2017 and has been in force since 1 April 2018.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 18 pages in English translation.
2 Scope Preview
GB/T 34362-2017 falls under ICS 19.100, in the field of testing.
This catalogue holds 637 other GB/T standards in that field.
In this catalogue, GB/T standards carry edition years from 1963 to 2026.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
English translation: about 18 pages
4 Related standards
Other editions:
GB/T 34362-2026 (later edition)
Standards on related subjects:
GB/T 35977-2018 — Remanufacturing—Technical specifications for surface repair of mechanical products
GB/T 35839-2018 — Non-destructive testing—Test method for measuring industrial computed tomography (CT) density
GB/T 33877-2017 — Non-destructive testing—Test method for comparing the brightness of fluorescent penetrants
GB/T 34361-2026 — Non-destructive testing - Test method for frequency scanning eddy current testing
GB/T 34357-2017 — Non-destructive testing—Terminology—Terms used in magnetic flux leakage testing
5 Classification and status
International classification (ICS): 19.100
Chinese Standard Classification (CCS): J 04
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34362-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34362-2017
$433.00