Valid

GB/T 34359-2017Deformed aluminum alloy precision forgings - General specifications (English PDF)

变形铝合金精密锻件 通用技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34359-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 14, 2017

Implementation date

May 1, 2018

Scope

GB/T 34359-2017 is the English-translated version of 变形铝合金精密锻件 通用技术条件.

GB/T 34359-2017 is the Chinese standard "Deformed aluminum alloy precision forgings - General specifications".

Its scope clause reads: This standard specifies the deformation of aluminum precision forgings (hereinafter referred to as "forgings") classification, technical requirements, test methods, inspection rules and standards Knowledge, Quality Certificate, Packaging, Transport and Storage.

This standard applies to the quality of less than 15kg deformation aluminum die forgings. Its clauses include terms and definitions; categories.

Found what you need?

Document preview — GB/T 34359-2017

National Standard of the People's Republic of China

ICS
77.120.10
Classification
J 32

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 categories

1 Scope

This standard specifies the deformation of aluminum precision forgings (hereinafter referred to as "forgings") classification, technical requirements, test methods, inspection rules and standards

Knowledge, Quality Certificate, Packaging, Transport and Storage.

This standard applies to the quality of less than 15kg deformation aluminum die forgings.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 231.1 Brinell hardness test of metallic materials - Part 1. Test methods

GB/T 2828 (all parts) count sampling inspection procedures

GB/T 2829 cycle test count sampling procedures and tables (for the stability of the test process)

GB/T 3191 aluminum and aluminum alloy extruded bar

GB/T 3199 aluminum and aluminum alloy products packaging, marking, transportation and storage

GB/T 3246.1 Deformed aluminum and aluminum alloy products - Part 1. Microstructure inspection methods

GB/T 3246.2-2012 Methods of test for textured aluminum and aluminum alloy products - Part 2. Method of low magnification test

GB/T 6519 Deformed aluminum, magnesium alloy products ultrasonic testing methods

GB/T 6892 general industrial aluminum and aluminum alloy extruded profiles

GB/T 7999 aluminum and aluminum alloy direct reading emission spectrometry

GB/T 8541 forging terminology

GB/T 8545-2012 aluminum and aluminum alloy forgings dimensional deviation and allowance

GB/T 9452 heat treatment furnace effective heating zone determination

GB/T 10125 artificial atmosphere corrosion test salt spray test

GB/T 11346 aluminum alloy castings X-ray inspection pinhole (round) grading

GB/T 12363 forgings functional classification

GB/T 16475 deformed aluminum and aluminum alloy status code

GB/T 16865 deformed aluminum, magnesium and its alloys processed products tensile test specimens and methods

GB/T 17432 Deformed aluminum and aluminum alloy chemical composition sampling method

GB/T 18851 (all parts) non-destructive testing penetration testing

GB/T 20975 (All parts) - Aluminum and aluminum alloys - Methods of chemical analysis

3 Terms and definitions

GB/T 8541 defined terms and definitions apply to this document.

4 categories

4.1

Forgings According to GB/T 12363 classification, divided into I, II, III, IV four categories.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 34359-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34359-2017

$145.00