GB/T 34073-2017Specification of pressure transmitter for internet of things (English PDF)
物联网压力变送器规范
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34073-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 31, 2017
Implementation date
February 1, 2018
Scope
GB/T 34073-2017 is the English-translated version of 物联网压力变送器规范.
GB/T 34073-2017 is the Chinese standard "Specification of pressure transmitter for internet of things".
Its scope clause reads: This standard specifies the Internet of Things pressure transmitter general technical conditions, including terms and definitions, classification and basic parameters, requirements, test side France, inspection rules and signs, instructions for use, packaging, storage and transportation requirements.
This standard applies to the pressure transmitter with Internet of Things (hereinafter referred to as pressure transmitter). This standard does not apply to pneumatic pressure transmitter, optical fiber pressure transmitter.
Found what you need?
Document preview — GB/T 34073-2017
National Standard of the People's Republic of China
- ICS
- 25.040.40
- Classification
- N 11
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 classification and basic parameters
- 4.1 Classification
- 4.2 Basic parameters
- 5 Requirements
- 5.1 Internet of Things Characteristics Requirements
- 5.2 Requirements related to level of accuracy
- 5.3 The impact of the amount of influence
- 5.4 Other Specifications
- 6 Test conditions and test methods
- 6.1 Test conditions
- 6.2 Test Method
- 6.3 Test reports and documents
- 7 Inspection rules
- 7.1 factory inspection and acceptance inspection
- 7.2 type test
- 8 logo, instruction manual, packaging, storage and transportation
- 8.1 mark
- 8.2 Operating Instructions
- 8.3 Packaging
- 8.4 Storage
- 8.5 Transport
- Appendix A (Normative) IoT Pressure Transmitter Data Document Structure
- Appendix B (Normative) Electromagnetic compatibility test results evaluation
1 Scope
This standard specifies the Internet of Things pressure transmitter general technical conditions, including terms and definitions, classification and basic parameters, requirements, test side
France, inspection rules and signs, instructions for use, packaging, storage and transportation requirements.
This standard applies to the pressure transmitter with Internet of Things (hereinafter referred to as pressure transmitter).
This standard does not apply to pneumatic pressure transmitter, optical fiber pressure transmitter.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 1048 pipe element PN (nominal pressure) definition and selection
GB/T 2828.1 Sampling procedures for sampling inspection - Part 1. Batch inspection sampling plan retrieved by acceptance quality limit (AQL)
GB/T 2900.56 Electrotechnical terminology control technology
Analog signals for process control systems - Part 1. DC current signals
Analog signals for process control systems - Part 2. DC voltage signals
GB 3836.1 Explosive atmospheres - Part 1. General requirements for equipment
GB 3836.2 Explosive atmospheres - Part 2. Equipment protected by flameproof enclosure "d"
GB 3836.4 Explosive atmospheres - Part 4. Equipment protected by intrinsically safe "i"
GB 3836.20 Explosive atmospheres Part 20. Equipment protection level (EPL) for the Ga-class equipment
GB/T 4208 enclosure protection (IP code)
GB/T 9969 Industrial Products Manual General
GB/T 13384 mechanical and electrical product packaging General technical conditions
GB/T 15479 Industrial automation instrumentation insulation resistance, dielectric strength of the technical requirements and test methods
GB/T 16842 shell and human protective equipment test fixture
GB/T 17212 Industrial process measurement and control terms and definitions
Transmitters for industrial process control systems Part 1. Method of performance assessment
Transmitters for industrial process control systems Part 2. Inspection and routine test methods
GB/T 17614.3 Industrial Process Control Systems Transmitter Part 3. Intelligent Transmitter Performance Evaluation Method
GB/T 17626.2 Electromagnetic compatibility test and measurement techniques Electrostatic discharge immunity test
GB/T 17626.3 Electromagnetic compatibility testing and measurement techniques RF electromagnetic field immunity test
GB/T 17626.4 Electromagnetic compatibility test and measurement techniques fast transient burst immunity test
GB/T 17626.5 electromagnetic compatibility test and measurement techniques surge (impact) immunity test
GB/T 18271.1 Process measurement and control devices - General performance evaluation methods and procedures - Part 1. General
GB/T 18271.2 Process measurement and control devices - General performance evaluation methods and procedures - Part 2. Tests under reference conditions
GB/T 18271.3 Process measurement and control devices - General performance evaluation methods and procedures - Part 3. Influence of impact test
GB/T 18271.4 Process measurement and control devices - General performance evaluation methods and procedures - Part 4. Assessment report content […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34073-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 34073-2017
$295.00