GB/T 34070-2017Standard of electrical measuring transmitters for internet of things (English PDF)
物联网电流变送器规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34070-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 31, 2017
Implementation date
February 1, 2018
Scope
GB/T 34070-2017 is the English-translated version of 物联网电流变送器规范.
GB/T 34070-2017 is the Chinese standard "Standard of electrical measuring transmitters for internet of things".
Its scope clause reads: This standard specifies the general technical conditions for the current transformer of things, including terms and definitions, classification, requirements, test methods, test rules Then, as well as the logo, instruction manual, packaging, storage and shipping requirements.
This standard applies to current measurement in the industrial system of things current transducer. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 34070-2017
National Standard of the People's Republic of China
- ICS
- 25.040
- Classification
- N 11
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Categories
- 5 Requirements
- 5.1 Use of environmental conditions
- 5.2 Basic parameters
- 5.3 Internet of Things Characteristics Requirements
- 5.4 Accuracy
- 5.5 Other technical requirements
- 6 test method
- 6.1 reference conditions
- 6.2 Equipment Conditions
- 6.3 Internet of Things Features
- 6.4 Accuracy
- 6.5 Other technical requirements
- 7 Inspection rules
- 7.1 Inspection category
- 7.2 factory inspection
- 7.3 type test
- 8 logo, instruction manual, packaging, storage and transportation
- 8.1 mark
- 8.2 Operating Instructions
- 8.3 Packaging
- 8.4 Storage
- 8.5 Transport
1 Scope
This standard specifies the general technical conditions for the current transformer of things, including terms and definitions, classification, requirements, test methods, test rules
Then, as well as the logo, instruction manual, packaging, storage and shipping requirements.
This standard applies to current measurement in the industrial system of things current transducer.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 9254 Information technology equipment radio disturbance limits and measurement methods
GB/T 9969 Industrial Products Manual General
GB/T 13850 AC power conversion to analog or digital signal of the electrical measurement transmitter
GB/T 17614.3 Industrial Process Control Systems Transmitter Part 3. Intelligent Transmitter Performance Evaluation Method
GB/T 17626.2 Electromagnetic compatibility test and measurement techniques Electrostatic discharge immunity test
GB/T 17626.3 Electromagnetic compatibility testing and measurement techniques RF electromagnetic field immunity test
GB/T 17626.4 Electromagnetic compatibility test and measurement techniques fast transient burst immunity test
GB/T 17626.5 electromagnetic compatibility test and measurement techniques surge (impact) immunity test
GB/T 17626.6 electromagnetic compatibility test and measurement techniques RF field induced conducted disturbances Immunity
GB/T 33905.3 Smart Sensors Part 3. Terminology
GB/T 34068 Internet of Things overall technical intelligence sensor interface specification
Determination of Concentration of Six Substances (Lead, Cadmium, Mercury, Hexavalent Chromium, Polybrominated Biphenyls, Polybrominated Diphenyl Ethers) Restricted by IEC 62321, Electrical and Electronic Products
Electrotechnical products - Determination of levels of sulfur regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenylethers)]
3 Terms and definitions
GB/T 13850 and GB/T 33905.3 defined by the following terms and definitions apply to this document.
3.1 The object
Object to be detected
3.2 Definition of object working status
Application-type knowledge documents that relate the transmitter test results to the working status of the object.
Note 1. The IOT current transducer deduces the working status of the object based on this definition.
Note 2. For example, it is possible to raise the current from a value close to 0 up to more than.200% of the nominal value for a period of time (eg 100ms) and at t2 (eg
2000ms) After the time quickly reduced to the nominal value of 100% of the process of change is defined as the start-up process, and so on.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34070-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34070-2017
$205.00