GB/T 34003-2017Detection method of impurity elements in boron nitride (English PDF)
氮化硼中杂质元素测定方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34003-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 12, 2017
Implementation date
February 1, 2018
Scope
GB/T 34003-2017 is the English-translated version of 氮化硼中杂质元素测定方法.
GB/T 34003-2017 gives the method for detecting impurity elements in boron nitride by inductively coupled plasma atomic emission spectrometry.
It specifies the principle of the method, the reagents and apparatus, the analysis steps and the precision for the determination of lithium, sodium, calcium, magnesium, iron, zinc, copper, nickel, manganese, titanium, strontium and cadmium.
In the method the boron nitride sample is dissolved by microwave digestion in a mixture of nitric and hydrofluoric acid, the hydrofluoric acid is removed by acidifying twice with nitric acid, the solution is diluted to volume, and the twelve elements are measured by inductively coupled plasma atomic emission spectrometry; Table 1 gives the minimum detectable concentration for each element, from 0.1 mg/kg for manganese to 2.0 mg/kg for sodium.
The reagents are hydrofluoric acid and nitric acid of MOS grade or better and pure water at least of the grade two quality specified in GB/T 6682, and the standard stock solutions are prepared from weighed salts dried at (105 +/- 5) C. It applies to the determination of those elements in boron nitride powder, boron nitride filament and boron nitride granules.
It cites GB/T 6682. It was issued on 12 July 2017 and has applied since 1 February 2018.
Found what you need?
Document preview — GB/T 34003-2017
National Standard of the People's Republic of China
- ICS
- 49.025.99
- Classification
- Q 69
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative reference documents
- 3 Principle of the method
- 4 Reagents and equipment
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the inductively coupled plasma atomic emission spectrometry for the determination of impurity elements in boron nitride products. Lithium, sodium, calcium, magnesium, iron, zinc, Copper, nickel, manganese, titanium, strontium, cadmium method principles, reagents and equipment, analysis steps and precision.
This standard applies to boron nitride powder, boron nitride wire, boron nitride particles of lithium, sodium, calcium, magnesium, iron, zinc, copper, nickel, manganese, titanium, strontium, cadmium Determination of the substance.
2 Normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 6682 Analytical laboratory water specifications and test methods
3 Principle of the method
Boron nitride sample with nitric acid, hydrofluoric acid mixed in the microwave digestion conditions dissolved, with 1. 1 nitric acid acid 2 times to remove hydrofluoric acid, dilution set The contents of lithium, sodium, calcium, magnesium, iron, zinc, copper, nickel, manganese, titanium, strontium and cadmium were measured by inductively coupled plasma atomic emission spectrometry content.
The minimum detection concentration of this method is shown in Table 1.
4 Reagents and equipment
4.1 Basic reagents and pure water
4.1.1 hydrofluoric acid. purity not lower than the MOS level.
4.1.2 nitric acid. purity not lower than the MOS level.
4.1.3 Nitric acid. (1 1)
4.1.4 Hydrochloric acid. (1 1)
4.1.5 pure water. purity should not be less than GB/T 6682 provisions of the secondary water.
4.2 Standard stock solution and standard solution
4.2.1 lithium standard stock solution. weighed in (105 ± 5) °C drying of anhydrous lithium chloride 0.6108g, soluble in pure water, transferred to 1000mL capacity
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download GB/T 34003-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-1992 — Water for analytical laboratory use--Specification and test methods
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 34003-2017
$145.00