GB/T 33904-2017Service protocol for instrument of industrial internet of things (English PDF)
工业物联网仪表服务协议
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33904-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 12, 2017
Implementation date
February 1, 2018
Scope
GB/T 33904-2017 is the English-translated version of 工业物联网仪表服务协议.
GB/T 33904-2017 is the Chinese national standard for the service protocol of instruments on an industrial internet of things.
It sets the coding rules and the content of the service identification code and the rules by which service marks are released, covering the modelling of the instrument, the structure of the code, the preparation of the service mark and the service architecture.
Tables give the service type codes for the IIOS, IICS, IIPS, IIAS and IIWRS service classes, and an informative annex shows the InstrumentML modelling flow. It applies to the management and application of industrial internet of things equipment, and defines terms such as service, application and industrial internet of things.
It cites GB/T 25069. It was issued on 12 July 2017 and has applied since 1 February 2018.
Found what you need?
Document preview — GB/T 33904-2017
National Standard of the People's Republic of China
- ICS
- 25.040
- Classification
- N 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- Introduction
- 1 Scope
- 2 normative reference document
- 3 Terms and definitions
- 4 acronym
- 5 industrial networking instrumentation service identification code
- 5.1 Industrial networking instrument modeling
- 5.2 coding structure
- 5.3 Preparation of service marks
- Industrial instrument network instrumentation service system
- 7 industrial networking instrumentation service logo release
- Appendix A (informative)
- Reference
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
Introduction
With the development of industrial information network technology, the network architecture as the main feature of the chemical industry instrument represents a new generation of control Network development trend. It can achieve a true sense of the office automation and industrial automation seamless integration. Its good interconnection and Scalability makes it a true sense of the industrial networking network architecture, in the industrial networking, the identity of the instrument should be Standardized use of attributes, services, and interoperability is the first problem that needs to be addressed by instrument interoperability goals.
1 Scope
This standard specifies the coding rules and contents of the Industrial Information System logo and the criteria for the issuance of service marks.
This standard applies to the management and application of industrial networking equipment.
2 Normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 25069 Information security technical terminology
3 Terms and definitions
GB/T 25069 Definitions and the following terms and definitions apply to this document.
3.1 Data
A reinterpreable formalization of information to apply to communication, interpretation or processing. [GB/T 5271.1-2000, defined 01.01.02]
3.2 Industrial automation instrumentation
In the industrial production process, the process parameters for the detection, display, record or control of the instrument.
Note: This standard referred to as instrument.
3.3 Application
Specific software functional units to solve problems in industrial process measurement and control. [GB/T 19769.1-2015, definition 3.6]
3.4 Extensible Markup Language
A subset of the standard common markup language, a markup language used to mark an electronic file to make it structurally.
3.5 Service
The execution of an object and/or object class is an operation or function that is based on a request for another object and/or object class. [GB/T 31230.3-2014, definition 3.3.32]
3.6 Industrial internet of things
The assembly of all kinds of applications in the field of industry is the foundation of intelligent application and information sharing in the broad field of industry.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 33904-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 25069-2022 — Information security techniques—Terminology
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 33904-2017
$205.00